Looking - Monitors & Sub

For Sale/Wanted
Forum rules
Note that Tir Na HiFi does not take any responsibility for transactions arranged or carried out here. It is up to the seller and buyer to check each other out! Please be sensible folks, and if there is something you think is wrong, let a mod know, OK?

To make it as clear as we can, here are some simple guidelines:

a) like any forum, the success of tirnahifi is entirely dependent on discussion. All members are encouraged to participate in discussion of music, hifi, etc.
b) tirnahifi is not designed to be, nor intended to be, a marketplace. Any member who uses the site merely for selling will be looked on suspiciously.
c) those members who choose to sell on the site should be aware that the mods do keep an eye on the stuff for sale, plus the demeanour of the seller. Sometimes we may lock/delete/ban a sales thread on this basis.
d) honesty is paramount in all selling transactions. Commercial sellers who label themselves as such are accepted at the discretion of the moderating team.
e) All ads have to include information about age, price, provenance, etc.
f) THE MODERATING TEAM RESERVE THE RIGHT TO REMOVE ANY ADS AT THEIR DISCRETION.
g) Commercial sellers should approach any of the moderation team in advance of posting. First time commercial posts without moderator contact will be removed.
Post Reply
Dean-Kennedy
Posts: 4
Joined: Wed Dec 31, 2014 12:15 am

Looking - Monitors & Sub

Post by Dean-Kennedy »

Looking preferably for a set of B&W dm601's, although any monitor with a Kevlar or carbon fibre cone will do(5.25" but the cabinets can be extended to 6" if necessary).
Condition of the cabinets is not a priority as the driver tweeter and crossover will be installed to a set of carbon fibre monitors that I have made (photo attached).
Also looking for a sub between 100 & 200 watts.
Any information or offers are appreciated.
The speaker was damaged while on display at an event.
The system is passive, also i work for a composites company, that is why i would like to have a kevlar/carbon cone, to keep with the composite speaker.

https://www.dropbox.com/s/p5bbxz6pgsgb3 ... o.jpg?dl=0
User avatar
Ivor
Posts: 4228
Joined: Sat Jan 16, 2010 11:21 pm

Re: Looking - Monitors & Sub

Post by Ivor »

I have a pair of floorstanders, DM603 S3 that I'm not using. Make me an offer if interested.

the pic below is just grabbed from the 'net but mine are in perfect working order. (some cabinet damage.)
The woofer is a 6.5 inch unit though.

http://www.bowers-wilkins.com/downloads ... manual.pdf
Image
Vinyl -anything else is data storage.

Thorens TD124 Mk1 + Kuzma Stogi 12"arm, HANA Red, Gold Note PH 10 + PSU. ADI-2 Dac, Lector CDP7, Wyred4Sound pre, Airtight ATM1s, Klipsch Heresy IV, Misc Mains, RCA + XLR ICs, Tellurium Q spkr cable
cbarone
Posts: 144
Joined: Fri Mar 19, 2010 1:18 pm

Re: Looking - Monitors & Sub

Post by cbarone »

How much Ivor? Thanks.
User avatar
Ivor
Posts: 4228
Joined: Sat Jan 16, 2010 11:21 pm

Re: Looking - Monitors & Sub

Post by Ivor »

cbarone wrote:How much Ivor? Thanks.
When Dean expressed interest I checked prices and they seem to go for €400/£400 so, taking into account the damage, I'm looking for €300. They've been in the corner of my son's room for years so they are a bit dusty.

See pic of damage below with black gaffing tape over it. The grill, when in place, hides much of it. As these were only ever in a cinema setup they were used with a REL sub so never were driven to really low frequencies. Mind you those B&W dome woofer do go low!

Image
Vinyl -anything else is data storage.

Thorens TD124 Mk1 + Kuzma Stogi 12"arm, HANA Red, Gold Note PH 10 + PSU. ADI-2 Dac, Lector CDP7, Wyred4Sound pre, Airtight ATM1s, Klipsch Heresy IV, Misc Mains, RCA + XLR ICs, Tellurium Q spkr cable
Post Reply