I think so too
I have try 3 times and no luck
No sound
MQN
Re: MQN
I have tried mqnplay v118 and v119 with control v31, and the sound is ok.
Well almost ok:
- earlier with control v29 I reported sound ok, except there was no sound when I had a small file
(< 23Mb) in a single-file playlist.
with control v30 this small single-file problem was gone.
But with play v118/119 and control v31, this problem is back again: So now sound is ok, except if try to play a small file single-playlist.
Cheers
Well almost ok:
- earlier with control v29 I reported sound ok, except there was no sound when I had a small file
(< 23Mb) in a single-file playlist.
with control v30 this small single-file problem was gone.
But with play v118/119 and control v31, this problem is back again: So now sound is ok, except if try to play a small file single-playlist.
Cheers
Gigabyte H97M-D3H with PPA OCXO module. i7-4790T, 800MHz. 8GB Ram, 800MHz.
PPA 2-rail LPSU & Pico. JCAT battery for OS-SSD and PPA v3 USBcard.
Server 2012 R2, AO 1.40. APL HiFi DAC-S, upd. Only use 1644 .wav
PPA 2-rail LPSU & Pico. JCAT battery for OS-SSD and PPA v3 USBcard.
Server 2012 R2, AO 1.40. APL HiFi DAC-S, upd. Only use 1644 .wav
Re: MQN
janh wrote:I have tried mqnplay v118 and v119 with control v31, and the sound is ok.
Well almost ok:
- earlier with control v29 I reported sound ok, except there was no sound when I had a small file
(< 23Mb) in a single-file playlist.
with control v30 this small single-file problem was gone.
But with play v118/119 and control v31, this problem is back again: So now sound is ok, except if try to play a small file single-playlist.
Cheers
Anyone else got it to work?
I just don't know why it doesn't work on my setup
Thank you
Re: MQN
wouldn't worry too much about it.elaprince wrote:janh wrote:I have tried mqnplay v118 and v119 with control v31, and the sound is ok.
Well almost ok:
- earlier with control v29 I reported sound ok, except there was no sound when I had a small file
(< 23Mb) in a single-file playlist.
with control v30 this small single-file problem was gone.
But with play v118/119 and control v31, this problem is back again: So now sound is ok, except if try to play a small file single-playlist.
Cheers
Anyone else got it to work?
I just don't know why it doesn't work on my setup
Thank you
Re: MQN
did say it was work in progress, any more comment about the sq ?janh wrote:I have tried mqnplay v118 and v119 with control v31, and the sound is ok.
Well almost ok:
- earlier with control v29 I reported sound ok, except there was no sound when I had a small file
(< 23Mb) in a single-file playlist.
with control v30 this small single-file problem was gone.
But with play v118/119 and control v31, this problem is back again: So now sound is ok, except if try to play a small file single-playlist.
Cheers
Re: MQN
My thoughts about sq:
I like v118 the least.
v117 I like the most. Clarity, detail, it is fine. I love it on soprano.
v119 a bit more resonant, fuller sound, also ok.
Cheers
I like v118 the least.
v117 I like the most. Clarity, detail, it is fine. I love it on soprano.
v119 a bit more resonant, fuller sound, also ok.
Cheers
Gigabyte H97M-D3H with PPA OCXO module. i7-4790T, 800MHz. 8GB Ram, 800MHz.
PPA 2-rail LPSU & Pico. JCAT battery for OS-SSD and PPA v3 USBcard.
Server 2012 R2, AO 1.40. APL HiFi DAC-S, upd. Only use 1644 .wav
PPA 2-rail LPSU & Pico. JCAT battery for OS-SSD and PPA v3 USBcard.
Server 2012 R2, AO 1.40. APL HiFi DAC-S, upd. Only use 1644 .wav
Re: MQN
No sound here either and control is up to 25% CPU.sbgk wrote:wouldn't worry too much about it.elaprince wrote:janh wrote:I have tried mqnplay v118 and v119 with control v31, and the sound is ok.
Well almost ok:
- earlier with control v29 I reported sound ok, except there was no sound when I had a small file
(< 23Mb) in a single-file playlist.
with control v30 this small single-file problem was gone.
But with play v118/119 and control v31, this problem is back again: So now sound is ok, except if try to play a small file single-playlist.
Cheers
Anyone else got it to work?
I just don't know why it doesn't work on my setup
Thank you
Apparently some of these MQn versions don't agree with Thesycon drivers.
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
Re: MQN
v117 is intriguing, balanced and has a lot of PRaT. Wow.
v118 and v119 in combination with control v31 do not work for me, neither with the OffRamp, nor with the Hugo :-(
Anyway, really enjoy v117. Thanks Gordon.
v118 and v119 in combination with control v31 do not work for me, neither with the OffRamp, nor with the Hugo :-(
Anyway, really enjoy v117. Thanks Gordon.
ASUS Z97M-PLUS;i7-4770;Server2012R2;SOtM tX-USB PCI; OffRamp5;AS DAX Discrete "Blackgated";Chord Hugo;EAR 912; EAR 869;SAC Igel;Odeon No.32S.