MQN

Anything to do with computer audio, hardware, software etc.
elaprince
Posts: 202
Joined: Mon Jan 19, 2015 1:11 pm

Re: MQN

Post by elaprince »

I think so too
I have try 3 times and no luck
No sound
elaprince
Posts: 202
Joined: Mon Jan 19, 2015 1:11 pm

Re: MQN

Post by elaprince »

Yes Gordon even v119 and control v31 no sound
Checked few times loading from different disk all same no sound
Only CPU goes to 25%
Thanks

Can anyone also try it and see if it works?
janh
Posts: 88
Joined: Wed Oct 30, 2013 9:24 pm

Re: MQN

Post by janh »

I have tried mqnplay v118 and v119 with control v31, and the sound is ok.
Well almost ok:

- earlier with control v29 I reported sound ok, except there was no sound when I had a small file
(< 23Mb) in a single-file playlist.
with control v30 this small single-file problem was gone.
But with play v118/119 and control v31, this problem is back again: So now sound is ok, except if try to play a small file single-playlist.

Cheers
Gigabyte H97M-D3H with PPA OCXO module. i7-4790T, 800MHz. 8GB Ram, 800MHz.
PPA 2-rail LPSU & Pico. JCAT battery for OS-SSD and PPA v3 USBcard.
Server 2012 R2, AO 1.40. APL HiFi DAC-S, upd. Only use 1644 .wav
elaprince
Posts: 202
Joined: Mon Jan 19, 2015 1:11 pm

Re: MQN

Post by elaprince »

janh wrote:I have tried mqnplay v118 and v119 with control v31, and the sound is ok.
Well almost ok:

- earlier with control v29 I reported sound ok, except there was no sound when I had a small file
(< 23Mb) in a single-file playlist.
with control v30 this small single-file problem was gone.
But with play v118/119 and control v31, this problem is back again: So now sound is ok, except if try to play a small file single-playlist.

Cheers

Anyone else got it to work?
I just don't know why it doesn't work on my setup
Thank you
sbgk
Posts: 1950
Joined: Mon Oct 07, 2013 9:45 pm

Re: MQN

Post by sbgk »

elaprince wrote:
janh wrote:I have tried mqnplay v118 and v119 with control v31, and the sound is ok.
Well almost ok:

- earlier with control v29 I reported sound ok, except there was no sound when I had a small file
(< 23Mb) in a single-file playlist.
with control v30 this small single-file problem was gone.
But with play v118/119 and control v31, this problem is back again: So now sound is ok, except if try to play a small file single-playlist.

Cheers

Anyone else got it to work?
I just don't know why it doesn't work on my setup
Thank you
wouldn't worry too much about it.
sbgk
Posts: 1950
Joined: Mon Oct 07, 2013 9:45 pm

Re: MQN

Post by sbgk »

janh wrote:I have tried mqnplay v118 and v119 with control v31, and the sound is ok.
Well almost ok:

- earlier with control v29 I reported sound ok, except there was no sound when I had a small file
(< 23Mb) in a single-file playlist.
with control v30 this small single-file problem was gone.
But with play v118/119 and control v31, this problem is back again: So now sound is ok, except if try to play a small file single-playlist.

Cheers
did say it was work in progress, any more comment about the sq ?
janh
Posts: 88
Joined: Wed Oct 30, 2013 9:24 pm

Re: MQN

Post by janh »

My thoughts about sq:
I like v118 the least.
v117 I like the most. Clarity, detail, it is fine. I love it on soprano.
v119 a bit more resonant, fuller sound, also ok.

Cheers
Gigabyte H97M-D3H with PPA OCXO module. i7-4790T, 800MHz. 8GB Ram, 800MHz.
PPA 2-rail LPSU & Pico. JCAT battery for OS-SSD and PPA v3 USBcard.
Server 2012 R2, AO 1.40. APL HiFi DAC-S, upd. Only use 1644 .wav
Aleg
Posts: 1381
Joined: Thu Oct 10, 2013 8:26 pm

Re: MQN

Post by Aleg »

sbgk wrote:
elaprince wrote:
janh wrote:I have tried mqnplay v118 and v119 with control v31, and the sound is ok.
Well almost ok:

- earlier with control v29 I reported sound ok, except there was no sound when I had a small file
(< 23Mb) in a single-file playlist.
with control v30 this small single-file problem was gone.
But with play v118/119 and control v31, this problem is back again: So now sound is ok, except if try to play a small file single-playlist.

Cheers

Anyone else got it to work?
I just don't know why it doesn't work on my setup
Thank you
wouldn't worry too much about it.
No sound here either and control is up to 25% CPU.
Apparently some of these MQn versions don't agree with Thesycon drivers.
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
maroni
Posts: 13
Joined: Wed Sep 23, 2015 10:14 am
Location: Switzerland

Re: MQN

Post by maroni »

v117 is intriguing, balanced and has a lot of PRaT. Wow.
v118 and v119 in combination with control v31 do not work for me, neither with the OffRamp, nor with the Hugo :-(

Anyway, really enjoy v117. Thanks Gordon.
ASUS Z97M-PLUS;i7-4770;Server2012R2;SOtM tX-USB PCI; OffRamp5;AS DAX Discrete "Blackgated";Chord Hugo;EAR 912; EAR 869;SAC Igel;Odeon No.32S.
sbgk
Posts: 1950
Joined: Mon Oct 07, 2013 9:45 pm

Re: MQN

Post by sbgk »

31/118 played ok last night, but not today, had to use 30/117 and after playing for a few seconds was able to use 31/118, so must be something that needs setting before play can start.
Post Reply