MQN
-
- Posts: 52
- Joined: Thu Sep 18, 2014 10:29 am
Re: MQN
+1 :)KUH wrote:...Hirez is also a good idea for a Christmas gift...
ASUS-H81i Plus, i3 4360, 8GB RAM, Linear PSU. USB/PCI PPA Studio V2.
Ubuntu Live USB in RAM
Soekris R2R Salas Ref D powered -> Modulus 86 -> MA Silver 8
Ubuntu Live USB in RAM
Soekris R2R Salas Ref D powered -> Modulus 86 -> MA Silver 8
Re: MQN
the pin is supposed to go to acquire state, pause state and then run, but I'm just going to run which may be causing some issues, but it means less code.adolfo.a.aguiar wrote:Here is what I have found out on no sound from the dev version:
if I play it after starting the PC, then I get no sound; if I play some other version and then the dev version, it plays ok.
In my system, the dev version SQ is more detailed and less harsh (quite rare!).
-
- Posts: 52
- Joined: Thu Sep 18, 2014 10:29 am
Re: MQN
In my case what happens is just that sometimes I need to past it twice to make it play. At first attempt there is no sound, so Ctrl+X (close window), Ctrl+C on file again and then play again and then it works. Sometimes is like that not always.sbgk wrote:the pin is supposed to go to acquire state, pause state and then run, but I'm just going to run which may be causing some issues, but it means less code.adolfo.a.aguiar wrote:Here is what I have found out on no sound from the dev version:
if I play it after starting the PC, then I get no sound; if I play some other version and then the dev version, it plays ok.
In my system, the dev version SQ is more detailed and less harsh (quite rare!).
ASUS-H81i Plus, i3 4360, 8GB RAM, Linear PSU. USB/PCI PPA Studio V2.
Ubuntu Live USB in RAM
Soekris R2R Salas Ref D powered -> Modulus 86 -> MA Silver 8
Ubuntu Live USB in RAM
Soekris R2R Salas Ref D powered -> Modulus 86 -> MA Silver 8
- Ken Moreland
- Posts: 814
- Joined: Sun Jan 17, 2010 7:47 pm
Re: MQN
When I began today I played 8.92 avx2 first just to make sure it and 3.74 were working and then switched to dev aa version and it played without problem , maybe if I had gone straight in I 'd have had the same problem as AA.
KM
KM
i5 QuietPC , JplayFemto , Singxer SU-6 , Holo Audio Spring DAC ,LAB12 Preamp, Roundtree Mono Amps, Rosso Fiorentino Elba 2 Speakers
.
.
Re: MQN
sbgk
This is the device id & pin nr of my SonicWeld Diverter:
Would like to try a fixed device version.
Cheers
This is the device id & pin nr of my SonicWeld Diverter:
Code: Select all
\\?\tusbaudio_enum#vid_23db&pid_0002&ks#0208#{6994ad04-93ef-11d0-a3cc-00a0c9223196}\pcm_out_02_00
0
Cheers
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
Re: MQN
Hi Gordon,
Would be great to try the fixed device version for my FireFace UCX:
\\?\usb#vid_0424&pid_3fc9#53e1cfbfea6d3c8#{6994ad04-93ef-11d0-a3cc-00a0c9223196}\ffusbwave03_44
0
Thanks a lot!
Thomas
(edit: copy txt instaed of pic * thks@TioFrancotirdor)
Would be great to try the fixed device version for my FireFace UCX:
\\?\usb#vid_0424&pid_3fc9#53e1cfbfea6d3c8#{6994ad04-93ef-11d0-a3cc-00a0c9223196}\ffusbwave03_44
0
Thanks a lot!
Thomas
(edit: copy txt instaed of pic * thks@TioFrancotirdor)
Last edited by Octagon on Fri Dec 12, 2014 4:48 pm, edited 1 time in total.
Coax tractrix horn system 2 corner subwoofer / 6 full digital amplifier D802 floating PSU 12V battery / digital XO/DRC / 2 PC floating PSU picoless battery/Mutec REF 10/2x Mutec MC3.1+ USB floating PSU 6V/FireFace UCX floating PSU 12V battery/Mutec MC-4
-
- Posts: 52
- Joined: Thu Sep 18, 2014 10:29 am
Re: MQN
To make life easier type:
mqndevinfo.exe >> SomeFileName.txt
in command line.
Your device identifier will be saved to SomeFileName.txt, so then you will be able to open it and copy/paste it here.
mqndevinfo.exe >> SomeFileName.txt
in command line.
Your device identifier will be saved to SomeFileName.txt, so then you will be able to open it and copy/paste it here.
ASUS-H81i Plus, i3 4360, 8GB RAM, Linear PSU. USB/PCI PPA Studio V2.
Ubuntu Live USB in RAM
Soekris R2R Salas Ref D powered -> Modulus 86 -> MA Silver 8
Ubuntu Live USB in RAM
Soekris R2R Salas Ref D powered -> Modulus 86 -> MA Silver 8
Re: MQN
sbgk wrote:uploaded control 3.74, a bit mellower
had a setting in 3.73 that was giving a harsh effect, it's also used in mqnplay, but seems ok there.
is this proof that the bits are storing an effect that's affecting the sound from control into the ram of mqnplay ?
edit - quite like 3.73, don't find it too harsh
Don't like 3.74
Still think 3.72 is better than 3.73.
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
Re: MQN
Crash on start.sbgk wrote:uploaded mqndevinfo which outputs the device name and pin id, I'll try and make a hard coded mqnplay version if you post these details. The hard coded device version sounds better than the auto device versions.
just double click on it
Error "mqndevinfo.exe has stopped working"
PC: CPU Q8400, 8GB Ram, Windows 8.1 x64
DAC: HRT Music Streamer II+, Asus Xonar Essence ST (+ HiEnd DYI upgrades)
DAC: HRT Music Streamer II+, Asus Xonar Essence ST (+ HiEnd DYI upgrades)