Bring out yer dead!

For Sale/Wanted
Forum rules
Note that Tir Na HiFi does not take any responsibility for transactions arranged or carried out here. It is up to the seller and buyer to check each other out! Please be sensible folks, and if there is something you think is wrong, let a mod know, OK?

To make it as clear as we can, here are some simple guidelines:

a) like any forum, the success of tirnahifi is entirely dependent on discussion. All members are encouraged to participate in discussion of music, hifi, etc.
b) tirnahifi is not designed to be, nor intended to be, a marketplace. Any member who uses the site merely for selling will be looked on suspiciously.
c) those members who choose to sell on the site should be aware that the mods do keep an eye on the stuff for sale, plus the demeanour of the seller. Sometimes we may lock/delete/ban a sales thread on this basis.
d) honesty is paramount in all selling transactions. Commercial sellers who label themselves as such are accepted at the discretion of the moderating team.
e) All ads have to include information about age, price, provenance, etc.
f) THE MODERATING TEAM RESERVE THE RIGHT TO REMOVE ANY ADS AT THEIR DISCRETION.
g) Commercial sellers should approach any of the moderation team in advance of posting. First time commercial posts without moderator contact will be removed.
Post Reply
User avatar
Fran
Site Admin
Posts: 4141
Joined: Sat Jan 16, 2010 10:03 pm

Bring out yer dead!

Post by Fran »

Literally....

I'm looking for some donor cases I can use to house some DIY projects in. So I'm wondering does anyone have dead CD players, amps etc sitting around, bound for the WEEE waste recycling but you didn't get to do it yet?

What I'm really looking for is the classic CD/amp sized cases (not the real slim DVD style ones), main body in metal rather than plastic*, doesn't matter about the front face. Think of the Marantz 5000 or 6000 CDPs, or really any of the older amp cases.
osefront.jpg
osefront.jpg (12.58 KiB) Viewed 1279 times
I will be gutting the inside, so if its any good, or theres any hope of you wanting to get it going again, hold on to it. This is literally for those things that are dead dead dead.


TIA,

Fran


* its not that I'm against plastic, just that when you take out the bits inside usually the plastic cases are very flimsy. Also, most of the stuff I use have power supplies that throw out heat, so the metal is handy here. Lastly, I can spray the metal a new colour pretty easily which improves the tolerance levels shown by my missus!! (not insignificant fact!)
Do or do not, there is no try
Top
tony
Posts: 3144
Joined: Mon Jan 18, 2010 2:36 pm

Re: Bring out yer dead!

Post by tony »

Pity if you had posted this 4-5 weeks ago I could have supplied you with 2 pioneer cases(CD and amp) They were wee'd after spending a number of years gathering dust.
GroupBuySD DAC/First Watt AlephJ/NigeAmp/Audio PC's/Lampi L4.5 Dac/ Groupbuy AD1862 DHT Dac /Quad ESL63's.Tannoy Legacy Cheviots.
Top
User avatar
Fran
Site Admin
Posts: 4141
Joined: Sat Jan 16, 2010 10:03 pm

Re: Bring out yer dead!

Post by Fran »

Ah - and I kept meaning to put up the post......

Anyway, what you had is exactly the kind of thing I'm after!!

Fran
Do or do not, there is no try
Top
User avatar
DaveF
Posts: 2869
Joined: Sun Jan 17, 2010 10:38 pm

Re: Bring out yer dead!

Post by DaveF »

I have an old Myryad MI120 power amp that has been unused for several years Fran. The casing is reasonably slim. The body is black and the unit has a brushed silver front fascia. I'm pretty sure it still works although I havent turned it on in a very long time. I used it to drive two centre rear speakers so it has had little use. Anyway, its taking up space and I've been looking to get rid of it for a while now. You could probably gut the inside for some useful parts.
"I may skip. I may even warp a little.... But I will never, ever crash. I am your friend for life. " -Vinyl.
Michell Gyrodec SE, Hana ML cart, Parasound JC3 Jr, Stax LR-700, Stax SRM-006ts Energiser, Quad Artera Play+ CDP
Top
User avatar
Fran
Site Admin
Posts: 4141
Joined: Sat Jan 16, 2010 10:03 pm

Re: Bring out yer dead!

Post by Fran »

Thanks DaveF - very kind offer!!

I feel a bit bad about taking something that's actually working though. It would make a lovely case though!!

See what you think, only if you're absolutely sure you want rid of it.


Fran
Do or do not, there is no try
Top
User avatar
DaveF
Posts: 2869
Joined: Sun Jan 17, 2010 10:38 pm

Re: Bring out yer dead!

Post by DaveF »

Fran,
I'll take a look at it during the week. I havent powered it in almost 8 years I'd say so I've no idea if it still works.

D
"I may skip. I may even warp a little.... But I will never, ever crash. I am your friend for life. " -Vinyl.
Michell Gyrodec SE, Hana ML cart, Parasound JC3 Jr, Stax LR-700, Stax SRM-006ts Energiser, Quad Artera Play+ CDP
Top
User avatar
Fran
Site Admin
Posts: 4141
Joined: Sat Jan 16, 2010 10:03 pm

Re: Bring out yer dead!

Post by Fran »

Sound DaveF, thats great.

Fran
Do or do not, there is no try
Top
Dowser
Posts: 153
Joined: Mon Jan 18, 2010 12:05 pm

Re: Bring out yer dead!

Post by Dowser »

Wow - that is too good to break up - I'll give you €30 and a full width Panasonic integrated (also working, but of somewhat lower quality!) that you can donate to Fran :D

Richard
Top
User avatar
Fran
Site Admin
Posts: 4141
Joined: Sat Jan 16, 2010 10:03 pm

Re: Bring out yer dead!

Post by Fran »

..... and if the panasonic is still working, might be better giving that to someone as a working unit.

Something thats beyond repair but in a good case is what I'm after - see the worst part of DIY is the casework. Just a major PITA to get anything that looks anyway half right - I've been tempted more than once to use a USA biscuit tin as chassis!!!


Upturned roasting dishes are more widely used than you would believe for valve amps!

Anyhow, you get the idea.

Fran
Do or do not, there is no try
Top
Dowser
Posts: 153
Joined: Mon Jan 18, 2010 12:05 pm

Re: Bring out yer dead!

Post by Dowser »

I hear you Fran - what dimensions are you after? I have a storeroom full of old comms equipment at work and have used them previously for PSU cases previously (although most of my PSUs are still on chipboard!). Only downside is that they generally need spraying as light grey or cream seems the standard casework colour.

I can see if there is anything suitable.

Richard
Top
Post Reply

Return to “Classifieds”