MQN
Re: MQN
Aleg
bottom of page 232
try a retest with some fast moving bass tracks
sure im been picky but if 100000 has it sounding more accurate why shouldnt R1.1
r1.1 has everything else better
i think if bass is fixed it will also improve sq overall again
dont know if its wise using drc while testing versions
cannot set a control that way id imagine
bottom of page 232
try a retest with some fast moving bass tracks
sure im been picky but if 100000 has it sounding more accurate why shouldnt R1.1
r1.1 has everything else better
i think if bass is fixed it will also improve sq overall again
dont know if its wise using drc while testing versions
cannot set a control that way id imagine
sd card player, modded soekris dac, class a lifepo4 amp or gb class a/b amp, diy open baffle speakers based on project audio mundorf trio 10's
Re: MQN
lol, JC was commenting on avx2 v1 100000 and said it's bass was weak.nige2000 wrote:OK tried r1. 1 and 100000
Aleg right r1.1 is a new base version
But JC right too bass control is not as good as 100000
Will need to be tightened up
Is r1.1 a halfway house between 448 and 2048
Can't find any comment on R1.1
Have ended up with sample size of 1024 for all formats
24 bit version - 16 bit is 4096 bytes and 24 bit is 6144 bytes
32 bit version - 16 bit is 4096 bytes and 24 is 8192 bytes
The period changes to allow the correct amount of data to be passed.
Last edited by sbgk on Sun Mar 09, 2014 1:06 pm, edited 1 time in total.
Re: MQN
I found JC's remark about bass quality in R1.1. Thanks for that.nige2000 wrote:Aleg
bottom of page 232
try a retest with some fast moving bass tracks
sure im been picky but if 100000 has it sounding more accurate why shouldnt R1.1
r1.1 has everything else better
i think if bass is fixed it will also improve sq overall again
dont know if its wise using drc while testing versions
cannot set a control that way id imagine
My DRC-music is convolved offline, so it is a fixed control point and no realtime convolving involved.
It does however allow me to eliminate disturbing room factors that are not due to the music or due to the playback device. It does give me a clearer view on the music and playback device itself.
Cheers
Aleg
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
Re: MQN
sbgk wrote:lol, JC was commenting on avx2 v1 100000 and said it's bass was weak.nige2000 wrote:OK tried r1. 1 and 100000
Aleg right r1.1 is a new base version
But JC right too bass control is not as good as 100000
Will need to be tightened up
Is r1.1 a halfway house between 448 and 2048
Can't find any comment on R1.1
Gordon
Inside that last post on page 232 JC says:
If one agrees each has to decide for himselfr1.1 works! music itself not better than "avx2 v1 win8.1-r2 100000"
resolution is a lot higher. it wins in bass quantity. not better in bass quality
Cheers
Aleg
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
Re: MQN
Weird thatsbgk wrote:lol, JC was commenting on avx2 v1 100000 and said it's bass was weak.nige2000 wrote:OK tried r1. 1 and 100000
Aleg right r1.1 is a new base version
But JC right too bass control is not as good as 100000
Will need to be tightened up
Is r1.1 a halfway house between 448 and 2048
Can't find any comment on R1.1
Have ended up with sample size of 1024 for all formats
24 bit version - 16 bit is 4096 bytes and 24 bit is 6144 bytes
32 bit version - 16 bit is 4096 bytes and 24 is 8192 bytes
The period changes to allow the correct amount of data to be passed.
I knew it didn't sound like a 2048 or a 448
I'd imagine in a perfect situation it should be the lowest possible
Would be curious to what 448 and below would do
Is it a real pita to lower further?
I know we should be getting on with K'S but still rather curious about this
sd card player, modded soekris dac, class a lifepo4 amp or gb class a/b amp, diy open baffle speakers based on project audio mundorf trio 10's
-
- Posts: 2491
- Joined: Mon Oct 07, 2013 11:09 pm
Re: MQN
thought bass layer is strong enough to make treble richer. from listening to r2, thought treble could be x5 richer in my 2012. only x3. still very very good. musicality is best element in this version. not heard better from older versionssbgk wrote: lol, JC was commenting on avx2 v1 100000 and said it's bass was weak.
Re: MQN
JC
Much seem Right with R1.1 As you say not balanced like 100000
Think if bass is fixed will fix balance
Why not mod r2 instead of r1
Much seem Right with R1.1 As you say not balanced like 100000
Think if bass is fixed will fix balance
Why not mod r2 instead of r1
sd card player, modded soekris dac, class a lifepo4 amp or gb class a/b amp, diy open baffle speakers based on project audio mundorf trio 10's
-
- Posts: 2491
- Joined: Mon Oct 07, 2013 11:09 pm
Re: MQN
already did (but corrupted...). R2 has better timing. but digital tune.... hmm...nige2000 wrote:JC
Much seem Right with R1.1 As you say not balanced like 100000
Think if bass is fixed will fix balance
Why not mod r2 instead of r1
my r1 has true analog tune.
actually the real reason is...
when a lot of things running, i.e. when jitters come, R2 compresses sound.
in R1, when jitter comes, R1 blurs the sound.
compressed=digital sound=bad.
i can tolerate blurred sound of R1.
might change my mind anytime. don't know enough