FS Parasound 2125 Amplifier

For Sale/Wanted
Forum rules
Note that Tir Na HiFi does not take any responsibility for transactions arranged or carried out here. It is up to the seller and buyer to check each other out! Please be sensible folks, and if there is something you think is wrong, let a mod know, OK?

To make it as clear as we can, here are some simple guidelines:

a) like any forum, the success of tirnahifi is entirely dependent on discussion. All members are encouraged to participate in discussion of music, hifi, etc.
b) tirnahifi is not designed to be, nor intended to be, a marketplace. Any member who uses the site merely for selling will be looked on suspiciously.
c) those members who choose to sell on the site should be aware that the mods do keep an eye on the stuff for sale, plus the demeanour of the seller. Sometimes we may lock/delete/ban a sales thread on this basis.
d) honesty is paramount in all selling transactions. Commercial sellers who label themselves as such are accepted at the discretion of the moderating team.
e) All ads have to include information about age, price, provenance, etc.
f) THE MODERATING TEAM RESERVE THE RIGHT TO REMOVE ANY ADS AT THEIR DISCRETION.
g) Commercial sellers should approach any of the moderation team in advance of posting. First time commercial posts without moderator contact will be removed.
Post Reply
woodlands
Posts: 105
Joined: Wed Jan 14, 2015 3:51 pm
Location: Portmarnock Dublin

FS Parasound 2125 Amplifier

Post by woodlands »

I have for sale a Parasound 2125 Amplifier.
Very Good operational condition.

For sale at Euro 275.

Specs and manual below...
• 125 watts rms per channel into 8Ω, all channels driven
• 200 watts rms per channel into 4Ω, all channels driven
• 200 watts rms per channel into 2Ω, all channels driven
• 400 watts rms bridged into 8 Ω or 4Ω mono
• 35 amps peak current per channel
• Impedance selector switch for 2Ω operation
• Bridging switch for stereo or mono operation
• A/B speaker terminals with individual on/off
• 18dB/octave high pass filter, switchable 20Hz or 40Hz
• Fully discrete circuitry with toroid transformers
• Efficient, low heat design
• DC Servo and relay protection circuits
• Automatic on/off by DC trigger with looping output
• Automatic on/off by audio signal with adjustable sensitivity
• Gold-plated RCA input jacks, loop output jacks
• Heavy duty 24k gold-plated 5-way speaker terminals
• Rear-mounted gain controls; ground lift switch
• Standby, channel status, high temperature indicators
• 2u chassis; RMK22 rack mount kit
• (W x D x H): 17.25” x 16” x 4.25 ” / 3.5” without feet


Net Weight
27 lbs , 12.3 kg

https://cdn.shopify.com/s/files/1/0763/ ... 1720883330
Attachments
parasound 2125 4 small.jpg
parasound 2125 4 small.jpg (101.19 KiB) Viewed 860 times
parasound 2125 2 small.jpg
parasound 2125 2 small.jpg (137.13 KiB) Viewed 870 times
parasound 2125 1 small.jpg
parasound 2125 1 small.jpg (110.79 KiB) Viewed 870 times
patbarrydub
Posts: 152
Joined: Sat Nov 01, 2014 10:00 pm

Re: FS Parasound 2125 Amplifier

Post by patbarrydub »

Hi, do the know if the feet can be removed easily and is it operational without them cheers?
woodlands
Posts: 105
Joined: Wed Jan 14, 2015 3:51 pm
Location: Portmarnock Dublin

Re: FS Parasound 2125 Amplifier

Post by woodlands »

Yes, the feet are only plastic and can be removed and it's fully operational. Best Regards Philip
woodlands
Posts: 105
Joined: Wed Jan 14, 2015 3:51 pm
Location: Portmarnock Dublin

sold- Parasound 2125 Amplifier

Post by woodlands »

Sold
Post Reply