Tír Na HiFi

elaprince wrote:Thanks
What would you recommend Nige for linear power supply??

Where you from ?
Is it 110 v or 220v?

How much plug and play is required or are you the diy type?

I am Adam friend
from Canada
Plug and play best but have a friend that might do it for me
Thanks Nige

elaprince wrote:I am Adam friend
from Canada
Plug and play best but have a friend that might do it for me
Thanks Nige

think i remember you at computeraudiophile when we were trying to get that audiophile windows to go working
seems like a very long time ago

canada is expensive for these type of things

im not sure if the intel boards work without power management so id be inclined to suggest either a teradak psu or leadex superflower 750w
or evga over with you
http://www.newegg.ca/Product/Product.as ... -_-Product

of course the teradak will be better
but the 750w smps atx supply will almost be as good as a pico with an excellent linear psu and its plug and play

http://www.amazon.ca/EVGA-SuperNOVA-Cer ... B00IKDETOW
This is OK or not really?

elaprince wrote:http://www.amazon.ca/EVGA-SuperNOVA-Cer ... B00IKDETOW
This is OK or not really?

is ok
best/simplest std config
to better this supply it will involve a teradak and/or alot of diy electronics including batteries etc etc

Thank you
Which Teradak would you recommend? 350 or 250?
Thanks

elaprince wrote:Thank you
Which Teradak would you recommend? 350 or 250?
Thanks

It shouldn't matter a whole lot
But I have seen better dynamics with larger power supplies
You do realise there's no endpoint to this

Yes never ending journey lol
Thank you Nige
As far as ram goes any recommendations?

What do you think about Paul Pang dual rail PSU??

any of these below would be good?

http://www.ebay.com/itm/TeraDak-DC-280W ... 1c25c3041a

http://www.ebay.com/itm/TeraDak-DC24V-6 ... 1e8c232301