Who knows what about thermal wrapping on houses?

User avatar
Ivor
Posts: 4245
Joined: Sat Jan 16, 2010 11:21 pm

Re: Who knows what about thermal wrapping on houses?

Post by Ivor »

augean-4354 wrote: Wed Feb 12, 2025 1:45 pm House Insurance companies can have views on this.
In what sense?
Vinyl -anything else is data storage.

Thorens TD124 Mk1 + Kuzma Stogi 12"arm, HANA Red, Gold Note PH 10 + PSU. ADI-2 Dac, Lector CDP7, Wyred4Sound pre, Airtight ATM1s, Klipsch Heresy IV, Misc Mains, RCA + XLR ICs, Tellurium Q spkr cable
User avatar
Fran
Site Admin
Posts: 4153
Joined: Sat Jan 16, 2010 10:03 pm

Re: Who knows what about thermal wrapping on houses?

Post by Fran »

If the spray foam installer doesn't use "cards" there is a danger of lack of air circulation between the roof membrane and the insulation, build up of moisture and then rot. Lots of cases in the UK apparently where spray was just sprayed directly on under the membrane. Installers just use cardboard stapled between the rafters, and then spray onto that - once the foam solidifies durability of the card doesn't matter and a small gap is left between the top side of the foam and the membrane.

Insurance companies saw the risk and sought to limit their exposure by not insuring where spray insulation was done in that way. Not sure what the position is here.
Do or do not, there is no try
User avatar
Ivor
Posts: 4245
Joined: Sat Jan 16, 2010 11:21 pm

Re: Who knows what about thermal wrapping on houses?

Post by Ivor »

Fran wrote: Thu Feb 13, 2025 12:05 am If the spray foam installer doesn't use "cards" there is a danger of lack of air circulation between the roof membrane and the insulation, build up of moisture and then rot. Lots of cases in the UK apparently where spray was just sprayed directly on under the membrane.
Yes, I do remember us discussing that. I'll keep an eye on quotes as we get them.
Vinyl -anything else is data storage.

Thorens TD124 Mk1 + Kuzma Stogi 12"arm, HANA Red, Gold Note PH 10 + PSU. ADI-2 Dac, Lector CDP7, Wyred4Sound pre, Airtight ATM1s, Klipsch Heresy IV, Misc Mains, RCA + XLR ICs, Tellurium Q spkr cable
User avatar
hudo
Posts: 233
Joined: Mon May 14, 2018 11:04 am

Re: Who knows what about thermal wrapping on houses?

Post by hudo »

Since we're talking about house isolation; did anybody fixed squeaking noisy floors, and maybe added some sound proofing inside floors or walls?
♪♫ sound sommelier ♪♫
Main: Pi2AES ⁘ Holo Spring 3 KTE ⁘ Michell Gyro SE ⁘ PrimaLuna EVO 300 Hybrid ⁘ ATC SCM40
Office: Schiit Modius ⁘ Schiit Asgard 3 MB ⁘ Fosi ZA3 ⁘ Audeze LCD2 ⁘ Sound Artists LS3/5

User avatar
Rocker
Posts: 564
Joined: Thu Jan 28, 2010 3:59 pm

Re: Who knows what about thermal wrapping on houses?

Post by Rocker »

Recently we got our UPVC windows and doors serviced. The fitter replaced the seals, all opening handles and any hinges that were worn. The windows were replacements for the original teak windows and around 25 years old. Air tightness and sound isolation are the big wins resulting from this work.

My iPhone has an app called DB, it measures sound levels. I am not very familiar with DBs but the following test might mean something more to you than me. There is a solar farm being built close to our house (about 2 to 2.5 Km as the crow flies). The machinery being used emits a staccato like sound which goes on continuously most days. Standing on our doorstep the sound reading is a steady 85DB. Inside the closed door the reading is 75DB. Audibly that is a significant difference whatsoever the readings say.
It's OK, if there is no bread I will eat cake.

Beware of a thin chef!
dubber
Posts: 95
Joined: Sun Nov 14, 2010 11:30 pm

Re: Who knows what about thermal wrapping on houses?

Post by dubber »

I can't recommend a company, but just to say, make sure whoever does it pays attention to details, e.g. around windows, around the footing etc. cold bridging is a big challenge in any retrofit.
Post Reply