Single driver, no crossover speakers

Post Reply
User avatar
markof
Posts: 1040
Joined: Thu Jul 05, 2012 10:54 am
Location: An Cobh

Single driver, no crossover speakers

Post by markof »

I'm mulling over changing out my Martin Logan-EM/ESL speakers in the near future.
Since moving them to a different room in the house (mandated by work from home) I have not been able to position them optimally due to room shape, furniture etc. - essentially they are too close to the corners and the front wall for the bi-polar design.

I have been considering Harbeths as a replacement, but lately I am intrigued by single driver/no crossover speakers such as the Sibelius by Pearl Acoustics.

I've never heard this type of speaker so any informed opinions on this category of speaker, especially in tonal range and sensitivity to room position, would be valuable ?

Mark
Main: Qobuz/Arcam Alpha 9 CD/Project Carbon Esprit->Auralic Polaris->Chord Silver Carnival->Martin Logan EM-ESL
Office: Qobuz->Auralic Aries Mini->Denafrips ARES II->miniDSP 2X4 HD>Primare I32->Harbeth P3ESR/REL T5X
paulb
Posts: 282
Joined: Wed Jan 20, 2010 5:58 pm

Re: Single driver, no crossover speakers

Post by paulb »

Not a lot of experience at that level but i had eclipse td 307 and 508...great speakers for difficult rooms.If you are ok with losing a bit a bass and treble they work great.Also playing at the moment with a pair of Anthony gallo micro and while also limited at extremes what they do with voices and imaging is amazing.i would Say that with bigger full range speakers positioning and distance to corners and back wall is more important.
User avatar
markof
Posts: 1040
Joined: Thu Jul 05, 2012 10:54 am
Location: An Cobh

Re: Single driver, no crossover speakers

Post by markof »

paulb wrote: Mon Jun 06, 2022 3:16 pm Not a lot of experience at that level but i had eclipse td 307 and 508...great speakers for difficult rooms.If you are ok with losing a bit a bass and treble they work great.Also playing at the moment with a pair of Anthony gallo micro and while also limited at extremes what they do with voices and imaging is amazing.i would Say that with bigger full range speakers positioning and distance to corners and back wall is more important.
Thanks for the reply Paul.
You sure have an exotic taste in speakers.I've never seen or heard anything like them. The design looks fantastic.

The corners and distance to the wall are an intractable issue here, so it may be best to stay away from the Sibelius floor standers.
They have a 30 day trial but the shipping costs are on the expensive side.

Regards, Mark.
Main: Qobuz/Arcam Alpha 9 CD/Project Carbon Esprit->Auralic Polaris->Chord Silver Carnival->Martin Logan EM-ESL
Office: Qobuz->Auralic Aries Mini->Denafrips ARES II->miniDSP 2X4 HD>Primare I32->Harbeth P3ESR/REL T5X
User avatar
Maciej
Posts: 272
Joined: Wed Sep 29, 2010 11:01 pm

Re: Single driver, no crossover speakers

Post by Maciej »

Hi Mark,

I used to have FRUGAL HORN mk3 from Electric Beach. http://electricbeachaudio.com/.
These are based on MarkAudio Alpair single drivers.

https://www.hifipig.com/electricbeach-f ... udspeaker/

Since I sold them to a friend of mine in Poland, the company moved to another version which seems to have additional tweeter on the top of the cabinet.

Speakers do not go overly loud, but enough to fill the room with sound, but do not expect extremely high volumes as the cone on the driver can be damaged. For normal listening levels those are excellent speakers, with very clean , well controlled, without coloration, and direct sound.

I modified the crossover after a while with better quality caps at the end, and the speakers moved to another level. As the crossover there, is very simple and it can be done easily, or perhaps you can ask the manufacturer to use better components right away.

Those are basically like Sibelius, just do not use solid wood cabinet, and possible Sibelius uses better crossover components, but EB are way cheaper.

The only problem now its that Electric Beach are based in UK.

Regards
Maciej
User avatar
markof
Posts: 1040
Joined: Thu Jul 05, 2012 10:54 am
Location: An Cobh

Re: Single driver, no crossover speakers

Post by markof »

Maciej wrote: Thu Jun 16, 2022 9:01 am Hi Mark,

I used to have FRUGAL HORN mk3 from Electric Beach. http://electricbeachaudio.com/.
These are based on MarkAudio Alpair single drivers.

https://www.hifipig.com/electricbeach-f ... udspeaker/

Since I sold them to a friend of mine in Poland, the company moved to another version which seems to have additional tweeter on the top of the cabinet.

Speakers do not go overly loud, but enough to fill the room with sound, but do not expect extremely high volumes as the cone on the driver can be damaged. For normal listening levels those are excellent speakers, with very clean , well controlled, without coloration, and direct sound.

I modified the crossover after a while with better quality caps at the end, and the speakers moved to another level. As the crossover there, is very simple and it can be done easily, or perhaps you can ask the manufacturer to use better components right away.

Those are basically like Sibelius, just do not use solid wood cabinet, and possible Sibelius uses better crossover components, but EB are way cheaper.

The only problem now its that Electric Beach are based in UK.

Regards
Maciej
Thanks for the links. I was unaware of this speaker company - very interesting.

Re: Sibelius - I believe that they use a modified Mark Audio driver which is specific to Pearl Acoustics and that there is no crossover in the design.

Mark.
Main: Qobuz/Arcam Alpha 9 CD/Project Carbon Esprit->Auralic Polaris->Chord Silver Carnival->Martin Logan EM-ESL
Office: Qobuz->Auralic Aries Mini->Denafrips ARES II->miniDSP 2X4 HD>Primare I32->Harbeth P3ESR/REL T5X
User avatar
Fran
Site Admin
Posts: 4141
Joined: Sat Jan 16, 2010 10:03 pm

Re: Single driver, no crossover speakers

Post by Fran »

Mark,

If you can build yourself, there are many many horn designs out there, but few commercial offerings (probably because of that). I have some fairly large ones I built a few years back (google sachiko double mouth horns) which sound very good indeed, and frugal horns like Maciej mentioned as well. If you do go this route, for many designs, you need to match the size of the horn to the room.

Image
Do or do not, there is no try
User avatar
Maciej
Posts: 272
Joined: Wed Sep 29, 2010 11:01 pm

Re: Single driver, no crossover speakers

Post by Maciej »

Fran wrote: Sat Jun 18, 2022 9:59 am Mark,

If you can build yourself, there are many many horn designs out there, but few commercial offerings (probably because of that). I have some fairly large ones I built a few years back (google sachiko double mouth horns) which sound very good indeed, and frugal horns like Maciej mentioned as well. If you do go this route, for many designs, you need to match the size of the horn to the room.

Image


Frugal horns that Fran has build while ago also sound amazing. I had them for a demo, and can certainly recommend.
If you can find them second hand, which I believe is not that easy as only limited quantity was build will be absolutely perfect choice.
Georgi
Posts: 223
Joined: Tue Apr 04, 2017 7:04 pm

Re: Single driver, no crossover speakers

Post by Georgi »

I built a pair of Frugal horns and Cyburgs Needle with some modification, like adding second mid/low driver, few good years back and got a very good results.
Attachments
img_2_1655716286356.jpg
img_2_1655716286356.jpg (86.65 KiB) Viewed 2224 times
img_1_1655716107036.jpg
img_1_1655716107036.jpg (106.12 KiB) Viewed 2224 times
User avatar
markof
Posts: 1040
Joined: Thu Jul 05, 2012 10:54 am
Location: An Cobh

Re: Single driver, no crossover speakers

Post by markof »

Fran wrote: Sat Jun 18, 2022 9:59 am Mark,

If you can build yourself, there are many many horn designs out there, but few commercial offerings (probably because of that). I have some fairly large ones I built a few years back (google sachiko double mouth horns) which sound very good indeed, and frugal horns like Maciej mentioned as well. If you do go this route, for many designs, you need to match the size of the horn to the room.

Image
Hi Fran,
Thanks for the reply.
I’m afraid that a self build is way beyond my capabilities.
The speakers appear fabulous to me but as my listening room is now a shared space they may be grounds for divorce :-).

Mark
Main: Qobuz/Arcam Alpha 9 CD/Project Carbon Esprit->Auralic Polaris->Chord Silver Carnival->Martin Logan EM-ESL
Office: Qobuz->Auralic Aries Mini->Denafrips ARES II->miniDSP 2X4 HD>Primare I32->Harbeth P3ESR/REL T5X
User avatar
markof
Posts: 1040
Joined: Thu Jul 05, 2012 10:54 am
Location: An Cobh

Re: Single driver, no crossover speakers

Post by markof »

Georgi wrote: Mon Jun 20, 2022 10:15 am I built a pair of Frugal horns and Cyburgs Needle with some modification, like adding second mid/low driver, few good years back and got a very good results.
Fantastic work. They look very smart.
Mark
Main: Qobuz/Arcam Alpha 9 CD/Project Carbon Esprit->Auralic Polaris->Chord Silver Carnival->Martin Logan EM-ESL
Office: Qobuz->Auralic Aries Mini->Denafrips ARES II->miniDSP 2X4 HD>Primare I32->Harbeth P3ESR/REL T5X
Post Reply