|SOLD|Unison Research Unico Primo Hybrid Integrated Amplifier|SOLD|

For Sale/Wanted
Forum rules
Note that Tir Na HiFi does not take any responsibility for transactions arranged or carried out here. It is up to the seller and buyer to check each other out! Please be sensible folks, and if there is something you think is wrong, let a mod know, OK?

To make it as clear as we can, here are some simple guidelines:

a) like any forum, the success of tirnahifi is entirely dependent on discussion. All members are encouraged to participate in discussion of music, hifi, etc.
b) tirnahifi is not designed to be, nor intended to be, a marketplace. Any member who uses the site merely for selling will be looked on suspiciously.
c) those members who choose to sell on the site should be aware that the mods do keep an eye on the stuff for sale, plus the demeanour of the seller. Sometimes we may lock/delete/ban a sales thread on this basis.
d) honesty is paramount in all selling transactions. Commercial sellers who label themselves as such are accepted at the discretion of the moderating team.
e) All ads have to include information about age, price, provenance, etc.
f) THE MODERATING TEAM RESERVE THE RIGHT TO REMOVE ANY ADS AT THEIR DISCRETION.
g) Commercial sellers should approach any of the moderation team in advance of posting. First time commercial posts without moderator contact will be removed.
Post Reply
Tadzo
Posts: 31
Joined: Tue Dec 15, 2015 3:39 pm

|SOLD|Unison Research Unico Primo Hybrid Integrated Amplifier|SOLD|

Post by Tadzo »

For sale:
Unison Research Unico Primo Hybrid Integrated Amplifier
SOLD

Primo is a hybrid integrated amplifier with a valve based pre-amp and a Mosfet based power amp.
Combine fantastically well to produce a fantastic / dynamic sound.

In excellent operational condition, supplied with remote.

>>No phono stage build in

The Unico Primo is a hybrid integrated stereo amplifier capable of delivering not less than 85W RMS continuous on a 8ohm load. As usual for Unison Research amplifiers, the declared power is actually lower in order to keep our promises in every condition. With real musical signals running through this amplifier, the maximum power will be even higher. Since this is a hybrid design that mates a powerful amplifier with an ECC83 triode, you get the best of both worlds with the Unico Primo: an amplifier that is powerful enough to drive most loudspeakers, and a sound quality that is usually associated with the finest valve designs.


Specifications

- Output power: >80W RMS on 8Ω

- Output stage: Dynamic A Class POWER MOSFET complementary pair

- Polarization: Classe A Dinamic

- Input stage: Triodi A-Class A

- Valve: 1 x ECC83 (12AX7)

- Sensibilty: 260mV

- Input impedance: 50 kΩ / 47 pF

- Frequency response: -0.1dB@10Hz / -0.5dB@100kHz

- SNR: 90dB

- THD: 0.15% @ 10W, 1kHz

- Negative feedback: 10dB

- Damping Factor: >50

- Inputs: 5 line RCA, 1 tape RCA

- Output: 1 tape RCA, 1 subwoofer RCA

- Output connectors: 4 +4 per Bi-Wiring

- Remote control: Volume, IR

- Power consumption: 380W max

- Dimensions (la x lu x alt): 43.5 x 43 x 9.5 cm

- Net weight: 14 kg

http://www.adverts.ie/22964116

https://www.stereophile.com/content/uni ... -amplifier
Post Reply