MQN

Anything to do with computer audio, hardware, software etc.
janh
Posts: 88
Joined: Wed Oct 30, 2013 9:24 pm

Re: MQN

Post by janh »

Aleg wrote:
janh wrote:I have listened to mqnplay 2012 r2 ldn v10 and ldn v12 (when it will).
v12 is more clearity. listen to a choir, with v12 I hear more detail of choir and acoustic, really an improvement. Also piano is very fine with v12.
Another nice step forward. Thank you, sbgk.
Hi janh

I notice you use the same software setup as I do.
Do you run 2012R2 in GUI mode or in minimal server mode?

I ask as on my setup mqn v11 and v12 keep crashing without notification. As I run in minimal server with AO1.30 it doesn't suprise me I don't get any messages as many Windows processes have been switched off.

Cheers
Hi
I run R2 in Core mode with Total Commander as shell, and when I then run AO, i choose Ultimate, and Yes to "Disable drivers and services", so pretty much is switched off. Hope you will have it fixed soon.

Jan H.
Gigabyte H97M-D3H with PPA OCXO module. i7-4790T, 800MHz. 8GB Ram, 800MHz.
PPA 2-rail LPSU & Pico. JCAT battery for OS-SSD and PPA v3 USBcard.
Server 2012 R2, AO 1.40. APL HiFi DAC-S, upd. Only use 1644 .wav
Aleg
Posts: 1381
Joined: Thu Oct 10, 2013 8:26 pm

Re: MQN

Post by Aleg »

Hi Jan

Thanks for replying.

The only difference I just noticed is that I'm running my OS in RAM, so I'll try the regular version and see if it is caused by the RAM-OS.

Cheers
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
User avatar
Octagon
Posts: 172
Joined: Tue Aug 19, 2014 2:50 pm

Re: MQN

Post by Octagon »

Aleg wrote:I ask as on my setup mqn v11 and v12 keep crashing without notification. As I run in minimal server with AO1.30 it doesn't suprise me I don't get any messages as many Windows processes have been switched off.
Hi Aleg,
I am in Core Mode as we are testing the KS versions here. You might give it a try?

Sorry that I didn't mentioned that... Not very clear :(

Take care
Thomas

Edit:
Just recognized your comment, Aleg. I have tested both: RAMOS and normal boot, check my post above....
Coax tractrix horn system 2 corner subwoofer / 6 full digital amplifier D802 floating PSU 12V battery / digital XO/DRC / 2 PC floating PSU picoless battery/Mutec REF 10/2x Mutec MC3.1+ USB floating PSU 6V/FireFace UCX floating PSU 12V battery/Mutec MC-4
Aleg
Posts: 1381
Joined: Thu Oct 10, 2013 8:26 pm

Re: MQN

Post by Aleg »

Thomas, Jan

Are you using Thesycon drivers or drivers from another manufacturer?

FF UCX uses RME self built drivers if I remember correctly.
APL Hifi DAC I don't know.

So this new direct writing into queue might be incompatible with a Thesycon driver set, or is it independent of the actual driver?
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
sbgk
Posts: 1950
Joined: Mon Oct 07, 2013 9:45 pm

Re: MQN

Post by sbgk »

Aleg wrote:Thomas, Jan

Are you using Thesycon drivers or drivers from another manufacturer?

FF UCX uses RME self built drivers if I remember correctly.
APL Hifi DAC I don't know.

So this new direct writing into queue might be incompatible with a Thesycon driver set, or is it independent of the actual driver?
it's still using the driver, so that's probably the reason, thought you had other devices, do they work ?

could try a few waits at the start, but the real benefit is passing the data to the driver and mqn sleeping.

Piano sounds like a private recital.

tried larger buffers and the sound gets more watery like.
Aleg
Posts: 1381
Joined: Thu Oct 10, 2013 8:26 pm

Re: MQN

Post by Aleg »

sbgk wrote:
Aleg wrote:Thomas, Jan

Are you using Thesycon drivers or drivers from another manufacturer?

FF UCX uses RME self built drivers if I remember correctly.
APL Hifi DAC I don't know.

So this new direct writing into queue might be incompatible with a Thesycon driver set, or is it independent of the actual driver?
it's still using the driver, so that's probably the reason, thought you had other devices, do they work ?

could try a few waits at the start, but the real benefit is passing the data to the driver and mqn sleeping.

Piano sounds like a private recital.

tried larger buffers and the sound gets more watery like.
Just tried directly via USB into the Hugo, which appears to use non-Thesycon drivers and also on this device the V12 crashes immediately after being started by control. The pre-V11 does run OK.
So maybe it is not the driver or both Thesycon and Chord driver are/behave similar in this respect.
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
User avatar
Octagon
Posts: 172
Joined: Tue Aug 19, 2014 2:50 pm

Re: MQN

Post by Octagon »

Aleg wrote:Are you using Thesycon drivers or drivers from another manufacturer?
Hi Aleg,

I use latest RME FF UCX drivers as you thought, Acourate over the FF Asio.

Cheers
Thomas
Coax tractrix horn system 2 corner subwoofer / 6 full digital amplifier D802 floating PSU 12V battery / digital XO/DRC / 2 PC floating PSU picoless battery/Mutec REF 10/2x Mutec MC3.1+ USB floating PSU 6V/FireFace UCX floating PSU 12V battery/Mutec MC-4
janh
Posts: 88
Joined: Wed Oct 30, 2013 9:24 pm

Re: MQN

Post by janh »

Aleg wrote:Thomas, Jan

Are you using Thesycon drivers or drivers from another manufacturer?

APL Hifi DAC I don't know.
I am not very technical, so take this:
APL (Alex Peychev of Bulgaria) HiFI DAC-S. originally with driver by M2Tech.
My update USB-module has a driver manufactured by APL HiFi. It also says "Digital signer M2Tech".

Cheers
Jan H.
Gigabyte H97M-D3H with PPA OCXO module. i7-4790T, 800MHz. 8GB Ram, 800MHz.
PPA 2-rail LPSU & Pico. JCAT battery for OS-SSD and PPA v3 USBcard.
Server 2012 R2, AO 1.40. APL HiFi DAC-S, upd. Only use 1644 .wav
sbgk
Posts: 1950
Joined: Mon Oct 07, 2013 9:45 pm

Re: MQN

Post by sbgk »

back to the drawing board with this one, not quite what I thought it was.
elaprince
Posts: 202
Joined: Mon Jan 19, 2015 1:11 pm

Re: MQN

Post by elaprince »

Hello Gordon
Did you make any new discovery or progress?
Thank you
Post Reply