Mint Condition
Heavy weight record clamp. An ideal way to keep records flat, it adds mass to the platter and record eliminating resonance which greatly improves the sound of any turntable.
Weight: 400gr
Asking Price: 39€
- SOLD - Record Puck Lp Vinyl Clamp Stabilizer
Forum rules
Note that Tir Na HiFi does not take any responsibility for transactions arranged or carried out here. It is up to the seller and buyer to check each other out! Please be sensible folks, and if there is something you think is wrong, let a mod know, OK?
To make it as clear as we can, here are some simple guidelines:
a) like any forum, the success of tirnahifi is entirely dependent on discussion. All members are encouraged to participate in discussion of music, hifi, etc.
b) tirnahifi is not designed to be, nor intended to be, a marketplace. Any member who uses the site merely for selling will be looked on suspiciously.
c) those members who choose to sell on the site should be aware that the mods do keep an eye on the stuff for sale, plus the demeanour of the seller. Sometimes we may lock/delete/ban a sales thread on this basis.
d) honesty is paramount in all selling transactions. Commercial sellers who label themselves as such are accepted at the discretion of the moderating team.
e) All ads have to include information about age, price, provenance, etc.
f) THE MODERATING TEAM RESERVE THE RIGHT TO REMOVE ANY ADS AT THEIR DISCRETION.
g) Commercial sellers should approach any of the moderation team in advance of posting. First time commercial posts without moderator contact will be removed.
Note that Tir Na HiFi does not take any responsibility for transactions arranged or carried out here. It is up to the seller and buyer to check each other out! Please be sensible folks, and if there is something you think is wrong, let a mod know, OK?
To make it as clear as we can, here are some simple guidelines:
a) like any forum, the success of tirnahifi is entirely dependent on discussion. All members are encouraged to participate in discussion of music, hifi, etc.
b) tirnahifi is not designed to be, nor intended to be, a marketplace. Any member who uses the site merely for selling will be looked on suspiciously.
c) those members who choose to sell on the site should be aware that the mods do keep an eye on the stuff for sale, plus the demeanour of the seller. Sometimes we may lock/delete/ban a sales thread on this basis.
d) honesty is paramount in all selling transactions. Commercial sellers who label themselves as such are accepted at the discretion of the moderating team.
e) All ads have to include information about age, price, provenance, etc.
f) THE MODERATING TEAM RESERVE THE RIGHT TO REMOVE ANY ADS AT THEIR DISCRETION.
g) Commercial sellers should approach any of the moderation team in advance of posting. First time commercial posts without moderator contact will be removed.
- SOLD - Record Puck Lp Vinyl Clamp Stabilizer
- Attachments
-
- Vinyl Clamp.jpg (26.17 KiB) Viewed 1556 times
Last edited by sdiesel77 on Fri Jan 02, 2015 10:40 pm, edited 2 times in total.
Tubes & Vinyls are making life brighter..
Re: Record Puck Lp Vinyl Clamp Stabilizer
I'd take that off you! Will pm.
Vinyl -anything else is data storage.
Thorens TD124 Mk1 + Kuzma Stogi 12"arm, HANA Red, Gold Note PH 10 + PSU. ADI-2 Dac, Lector CDP7, Wyred4Sound pre, Airtight ATM1s, Klipsch Heresy IV, Misc Mains, RCA + XLR ICs, Tellurium Q spkr cable
Thorens TD124 Mk1 + Kuzma Stogi 12"arm, HANA Red, Gold Note PH 10 + PSU. ADI-2 Dac, Lector CDP7, Wyred4Sound pre, Airtight ATM1s, Klipsch Heresy IV, Misc Mains, RCA + XLR ICs, Tellurium Q spkr cable
Re: Record Puck Lp Vinyl Clamp Stabilizer
Sorry.... change of heart here... it's a good product at a very good price but it will be too heavy for my turntable. The Roksan Xeres suffers from "sag" (don't we all) and 400gm will do it no good. If you see the pic below the centre cutout is what can sag over time.... Mine is good so I wouldn't tempt fate!
Vinyl -anything else is data storage.
Thorens TD124 Mk1 + Kuzma Stogi 12"arm, HANA Red, Gold Note PH 10 + PSU. ADI-2 Dac, Lector CDP7, Wyred4Sound pre, Airtight ATM1s, Klipsch Heresy IV, Misc Mains, RCA + XLR ICs, Tellurium Q spkr cable
Thorens TD124 Mk1 + Kuzma Stogi 12"arm, HANA Red, Gold Note PH 10 + PSU. ADI-2 Dac, Lector CDP7, Wyred4Sound pre, Airtight ATM1s, Klipsch Heresy IV, Misc Mains, RCA + XLR ICs, Tellurium Q spkr cable
Re: Record Puck Lp Vinyl Clamp Stabilizer
No prob. Still available
Tubes & Vinyls are making life brighter..
-
quadpsaudiotrioc100
- Posts: 25
- Joined: Fri Sep 24, 2010 1:14 pm
Re: Record Puck Lp Vinyl Clamp Stabilizer
Hi Ya, Is this literally 400g? Like almost half a kilogram? I'm just wondering if this will suit in the PJ Debut TT? Thanks. Jeth
Re: Record Puck Lp Vinyl Clamp Stabilizer
Yep 400gr, checked with a scale, i'd day it should be fit any TT. I used it on my custom TT and then on my marantz TT15-S1quadpsaudiotrioc100 wrote:Hi Ya, Is this literally 400g? Like almost half a kilogram? I'm just wondering if this will suit in the PJ Debut TT? Thanks. Jeth
Tubes & Vinyls are making life brighter..
Re: Record Puck Lp Vinyl Clamp Stabilizer
Hi
If Jeth doesn't take it I will take it off you.
Let me know
Thanks
Conor
If Jeth doesn't take it I will take it off you.
Let me know
Thanks
Conor
Lenco L75 Self build, Roksan Nima tonearm, Benz MicroGlider SL, AudioResearch PH7 phono, Luxman SQ-38U Integrated (or a Wavac MD300b),
BlueSound Node 2i, Auralic Vega, AudioNote AN/E Speakers.
BlueSound Node 2i, Auralic Vega, AudioNote AN/E Speakers.
-
quadpsaudiotrioc100
- Posts: 25
- Joined: Fri Sep 24, 2010 1:14 pm
Re: Record Puck Lp Vinyl Clamp Stabilizer
Hi Conor, I pass it on. I think its so heavy for my TT. Thanks. Jeth
Re: Record Puck Lp Vinyl Clamp Stabilizer
Hi Conor,ConorW wrote:Hi
If Jeth doesn't take it I will take it off you.
Let me know
Thanks
Conor
PM sent
Tubes & Vinyls are making life brighter..