dont think everything is better in 8.59 over 8.58
can seem a little strained or noisy at times
but as you say much is better
were there other changes?
MQN
Re: MQN
Windows 8.1, APL-HiFi DAC-S
I only use 1644 Normal.
8.42 and 8.45 only gave distorted sound.
8.55 and 8.59 both work fine. They are clearly better than 8.16 which I used until now.
I only use 1644 Normal.
8.42 and 8.45 only gave distorted sound.
8.55 and 8.59 both work fine. They are clearly better than 8.16 which I used until now.
Gigabyte H97M-D3H with PPA OCXO module. i7-4790T, 800MHz. 8GB Ram, 800MHz.
PPA 2-rail LPSU & Pico. JCAT battery for OS-SSD and PPA v3 USBcard.
Server 2012 R2, AO 1.40. APL HiFi DAC-S, upd. Only use 1644 .wav
PPA 2-rail LPSU & Pico. JCAT battery for OS-SSD and PPA v3 USBcard.
Server 2012 R2, AO 1.40. APL HiFi DAC-S, upd. Only use 1644 .wav
Re: MQN
quite like the sound of 8.60.
what's better - a 32 bit register or a 64 bit one ? you would think a 32 bit one would be because it's smaller and so should be faster and is better for holding smaller numbers, however in a 64 bit cpu the 32 bit register gets auto zero extended to 64 bit, so you don't get any benefit from the 32 bit if it's constantly being updated because the zero extend has an effect on the sq. Just one of the thousand things to think about.
without assembly code the compiler will try and use 32 bit where possible.
8.60 uses 64 bit registers.
what's better - a 32 bit register or a 64 bit one ? you would think a 32 bit one would be because it's smaller and so should be faster and is better for holding smaller numbers, however in a 64 bit cpu the 32 bit register gets auto zero extended to 64 bit, so you don't get any benefit from the 32 bit if it's constantly being updated because the zero extend has an effect on the sq. Just one of the thousand things to think about.
without assembly code the compiler will try and use 32 bit where possible.
8.60 uses 64 bit registers.
Re: MQN
Yep agree.nige2000 wrote:dont think everything is better in 8.59 over 8.58
can seem a little strained or noisy at times
but as you say much is better
were there other changes?
But amazing detail.
May be a little less good in bass.
Maplin XM21X 12V float charging A123 26650 LiFePO4 battery/Maxwell Supercap PSU for Mitac PD10-BI J1900 Bay Trail, WTFPlay, Hiface Evo, Bow Technologies 1704 NOS DAC, StereoKnight TVC, Quad II monoblocks, ZU Audio Druid Mk4/Method Sub
Re: MQN
Just tried 8.61, so I must improve on my speed of testing!
8.61 Normal I would have said had enough detail for anyone. Quite amazing amount. And it had brought back a lovely bass underpinning that was missing in 8.59 Normal.
Lovely taut attack and relaxing decay.
All round my new reference. ...may be until 8.64?
Is 8.61 good enough to win round nige to WDM-KS? Got to be getting close I reckon.
Jonathan
8.61 Normal I would have said had enough detail for anyone. Quite amazing amount. And it had brought back a lovely bass underpinning that was missing in 8.59 Normal.
Lovely taut attack and relaxing decay.
All round my new reference. ...may be until 8.64?
Is 8.61 good enough to win round nige to WDM-KS? Got to be getting close I reckon.
Jonathan
Maplin XM21X 12V float charging A123 26650 LiFePO4 battery/Maxwell Supercap PSU for Mitac PD10-BI J1900 Bay Trail, WTFPlay, Hiface Evo, Bow Technologies 1704 NOS DAC, StereoKnight TVC, Quad II monoblocks, ZU Audio Druid Mk4/Method Sub
Re: MQN
8.64 is very nice.
Very good tonality, very realistic.
Good in details
Well balanced overall.
Would like to have a 176.4/24, just for once, to be able to test this quality player on a DoP file.
Could you do this with the 8.64, just as a one off for now?
Very good tonality, very realistic.
Good in details
Well balanced overall.
Would like to have a 176.4/24, just for once, to be able to test this quality player on a DoP file.
Could you do this with the 8.64, just as a one off for now?
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
Re: MQN
8.64
Good detail
tracks with a little static background still seem to be amplified when compared to wasapi
maybe thats noise?
agility seems a little slow maybe something similar to difference between avx and avx2 wasapi
Good detail
tracks with a little static background still seem to be amplified when compared to wasapi
maybe thats noise?
agility seems a little slow maybe something similar to difference between avx and avx2 wasapi
sd card player, modded soekris dac, class a lifepo4 amp or gb class a/b amp, diy open baffle speakers based on project audio mundorf trio 10's
Re: MQN
With 8.64 Normal, I am getting an over-exaggerated emphasis on the vocals centre compared with the excellent more balanced 8.61 Normal. A bit strained.nige2000 wrote:8.64
Good detail
tracks with a little static background still seem to be amplified when compared to wasapi
maybe thats noise?
agility seems a little slow maybe something similar to difference between avx and avx2 wasapi
Maplin XM21X 12V float charging A123 26650 LiFePO4 battery/Maxwell Supercap PSU for Mitac PD10-BI J1900 Bay Trail, WTFPlay, Hiface Evo, Bow Technologies 1704 NOS DAC, StereoKnight TVC, Quad II monoblocks, ZU Audio Druid Mk4/Method Sub