8.06 avx2 is ok
Resolution and control still
Still noticeable in echo decay and breathing
MQN
Re: MQN
Working here also. Sounds smooth and full bodied to me on sharp material.
Detail, decay personally for me this seems really good version. This one is worth creating some hires versions.
Detail, decay personally for me this seems really good version. This one is worth creating some hires versions.
GroupBuySD DAC/First Watt AlephJ/NigeAmp/Audio PC's/Lampi L4.5 Dac/ Groupbuy AD1862 DHT Dac /Quad ESL63's.Tannoy Legacy Cheviots.
Re: MQN
+1tony wrote:Working here also. Sounds smooth and full bodied to me on sharp material.
Detail, decay personally for me this seems really good version. This one is worth creating some hires versions.
PC: i5, 8GB RAM, SSD, WS 2012 R2 (64bit) RAM loaded, AO | DDC: XMOS-WaveIO
10MHz-Master-Clock: Morion MV89 | Reclocker-Cascade: 3x Mutec MC-3+ | DAC: Audio-GD Master 7
Preamp: Audio-GD Master 1 | Speaker: Adam Tensor Epsilon | Sub: Teufel M11000 THX II
10MHz-Master-Clock: Morion MV89 | Reclocker-Cascade: 3x Mutec MC-3+ | DAC: Audio-GD Master 7
Preamp: Audio-GD Master 1 | Speaker: Adam Tensor Epsilon | Sub: Teufel M11000 THX II
Re: MQN
It might be but unfortunately for me, it has the most clicking noise ever. two or three a second or two continuously.sbgk wrote:8.07 16/44 any good ?
could be the second best on the planet
Sorry
Maplin XM21X 12V float charging A123 26650 LiFePO4 battery/Maxwell Supercap PSU for Mitac PD10-BI J1900 Bay Trail, WTFPlay, Hiface Evo, Bow Technologies 1704 NOS DAC, StereoKnight TVC, Quad II monoblocks, ZU Audio Druid Mk4/Method Sub
Re: MQN
8.07 has better clarity/detail than 8.09 avx2'ssbgk wrote:8.09 should stop the clicking, might sound better than 8.07, don't know.
sd card player, modded soekris dac, class a lifepo4 amp or gb class a/b amp, diy open baffle speakers based on project audio mundorf trio 10's
Re: MQN
both 1644 8.08normal+3.64 and 1644 8.09normal+3.64 show NO clicks anymore on my system.
edit
about sq (as always in my view and on my system)
(1644 8.08normal+3.64 > 1644 8.09normal+3.64) < 1644 7.86normal+3.64
1644 7.86normal+3.64 is really good, my preferred at the moment
Listened to Dave Holland - Not for Nothin' [ECM]
beside that, I switched to TR0.5ms (from 1.0ms) and XMOS minimum latency (from low), what a change for the better!!! The sound is more coherent, timing has improved. Another sound indeed. I tried minimum latency months ago (the OS setting were quite different) and the sound seemed a little bit strained, I preferred low and kept low until now.
edit
about sq (as always in my view and on my system)
(1644 8.08normal+3.64 > 1644 8.09normal+3.64) < 1644 7.86normal+3.64
1644 7.86normal+3.64 is really good, my preferred at the moment
Listened to Dave Holland - Not for Nothin' [ECM]
beside that, I switched to TR0.5ms (from 1.0ms) and XMOS minimum latency (from low), what a change for the better!!! The sound is more coherent, timing has improved. Another sound indeed. I tried minimum latency months ago (the OS setting were quite different) and the sound seemed a little bit strained, I preferred low and kept low until now.
Last edited by m.massimo on Mon Sep 29, 2014 5:38 pm, edited 1 time in total.
Re: MQN
8.09 avx2 works with Audiophilleo too, no crackles, clicks, stuttering or distortions.Just sweet music.This version is really,really smooth.Perfect for harsh recordings,but maybe overall a bit too soft?
Cheers
Jorgen
Cheers
Jorgen
Zuma with i7 IvyB 3770T-1,6GHz,WS R2 MSM ,PPA V4 card + NEC drivers,PPA Red Sata,PPA Pico,PPA power cables,RAM Crucial BT 4GB 800mHz 9-9-9-24 and 3 separate PSUs-TZYun Red USB cable-AP2 with PP -direct BNC -Metrum Octave Mk1-WAL L1-JOB 225