MQN

[sbgk]

Unfortunately 7.16 sse2 is not working on any of the server 2012 versions as described below. Looks like mqnplay stops before playing starts, at least in my setup.

Tested on Server 2012 R2 with AudioPhil's Optimizer, single PC

Mqncontrol 3.64, portaudio 30, mqnplay 1644 7.15 wdmks sse2
GUI: ok GUI full AO optimized: ok
Minimal server: ok Minimal server full AO optimized: ok
Core full AO optimized: not working

I am still amazed listening to 7.15 ;)
Thomas

Shouldn't be any difference between operation of v15 and v16, just 2 build settings which shouldn't have any effect.

[sbgk]

Hmmm
Sbgk has a amanero so...
maybe he meant more like mqn wasapi without pa
Writing a mqn ks driver sounds cool for a usb i2s device would it be too much work?

would the device not come with a driver ? Don't understand the requirement.

[nige2000]

Sorry was a little confused when you said direct to device
Though I often wonder would having latency and buffer settings built into the driver like Thesycon does have extra benefit
Or is there possible driver optimisations for mqn

[nige2000]

Aaa aawa aa

[lukivision]

Aaa aawa aa

Aha.

[nige2000]

Aaa aawa aa

Aha.

Tapatalk in my pocket
Expect more nonsense ;)

[nige2000]

7.16 and pa 30 ks
Is starting to get somewhere
Great stuff [SMILING FACE WITH OPEN MOUTH]

micro is better with wasapi

[Clive]

Following a bit of a sabbatical I'm trying to get KS to work on my 8.1 machine. I'm using 7.16 SSE and 3.64 Control, PA V30.

My dac shows as device 4 so I've set this in mqnparam.txt

Control and mqnplay are set for admin priv and I am using Tasker though I get a similar result without it.

To disable mmcss I have set:
[HKEY_LOCAL_MACHINE \SYSTEM \CurrentControlSet \Services \Audiosrv]DependOnService = "..."
I typed exactly "..." into the data field.

The first mqn window comes up fine, the 2nd window is empty and nothing happens.

Any inspiration out there? Please......:-)

[sbgk]

Following a bit of a sabbatical I'm trying to get KS to work on my 8.1 machine. I'm using 7.16 SSE and 3.64 Control, PA V30.

My dac shows as device 4 so I've set this in mqnparam.txt

Control and mqnplay are set for admin priv and I am using Tasker though I get a similar result without it.

To disable mmcss I have set:
[HKEY_LOCAL_MACHINE \SYSTEM \CurrentControlSet \Services \Audiosrv]DependOnService = "..."
I typed exactly "..." into the data field.

The first mqn window comes up fine, the 2nd window is empty and nothing happens.

Any inspiration out there? Please......:-)

I just removed mmcss from the dependency, don't know about ..., does mqn wasapi work ?

[Clive]

Wasapi did work but now does the same. Should I restore the text in the mmcss field? I should have written down the text....



I've set mmcss back to the old setting but wasapi now results in an empty window......What have I done. ....