anyone tried running as a super administrator account ?
http://en.kioskea.net/faq/29289-windows ... count-mode
just enabled it, hasn't made it sound worse.
MQN
Re: MQN
sbgk wrote:do you disable the jplay service and reboot before using mqn ?Ken Moreland wrote:24/96 5.15avx2 is better than 5.14 . Bass is tighter and treble is wonderful. I did a comparison using only one track between Jplay 24/96 PCM , MQN 24/96 PCM and Jplay DSD. MQN is ahead of Jplay PCM in terms of detail/emotion and close to Jplay DSD IMHO
KM
likely not
is jplay service messing with the registry outside of playback
sd card player, modded soekris dac, class a lifepo4 amp or gb class a/b amp, diy open baffle speakers based on project audio mundorf trio 10's
Re: MQN
sets the system time and reserves ram and other things, I always preferred mqn without jplay service running.nige2000 wrote:sbgk wrote:do you disable the jplay service and reboot before using mqn ?Ken Moreland wrote:24/96 5.15avx2 is better than 5.14 . Bass is tighter and treble is wonderful. I did a comparison using only one track between Jplay 24/96 PCM , MQN 24/96 PCM and Jplay DSD. MQN is ahead of Jplay PCM in terms of detail/emotion and close to Jplay DSD IMHO
KM
likely not
is jplay service messing with the registry outside of playback
Re: MQN
think it's made a difference, more transparent ?sbgk wrote:anyone tried running as a super administrator account ?
http://en.kioskea.net/faq/29289-windows ... count-mode
just enabled it, hasn't made it sound worse.
Re: MQN
I'm still using the 2.97 control, but I don't understand what you meant about what memory configuration I have! If you meant the RAM settings, I never changed anything.dannyhc wrote:Please list control version used and what memory configuration you have?sima66 wrote:Did not do much listening lately, but 5.14 avx2 is out of this world!!!
I did not try anything higher than 5.14, but I don't understand how I can play avx2 with Ivy Bridge?!
I have no problems in getting it to play it's just the sound has a metallic sound to it and produces a lot of background noise.
I tried playing back off the onboard sound card via optical into my DAC, still exhibits the same issue. I am beginning to suspect my memory might be at fault although I run loose timings at 1333Mhz.
The only version that runs perfectly is 4.08 even the newer SSE2 ones fail, will continue troubleshooting tonight.
I5 4440+TXCOmobo+JCAT Femto-Intona-JKRegen+HynesPS+TeraDak ATX-820W=JCATusb=DiverterHR=Wadia 931/922(GNSC mod)=PassLabsXA100.5=2xValhalla=Stacked&moded ESL57+JAS SuperTweet+2MJ Acoustics Ref.I
4SteinHarmonizers;RR777;Tellus;StillpointsUltraSS
4SteinHarmonizers;RR777;Tellus;StillpointsUltraSS
Re: MQN
Thanks, I mean by how many RAM modules are you running and what timings they are at? Do you have 4 banks populated or just 2? Do you know if your Ram are single sided or double sided modules?sima66 wrote: I'm still using the 2.97 control, but I don't understand what you meant about what memory configuration I have! If you meant the RAM settings, I never changed anything.
I will try 2.97 control tonight and see if this is the silver bullet, thanks for your insight.
Re: MQN
nige2000 wrote:sbgk wrote:do you disable the jplay service and reboot before using mqn ?Ken Moreland wrote:24/96 5.15avx2 is better than 5.14 . Bass is tighter and treble is wonderful. I did a comparison using only one track between Jplay 24/96 PCM , MQN 24/96 PCM and Jplay DSD. MQN is ahead of Jplay PCM in terms of detail/emotion and close to Jplay DSD IMHO
KM
likely not
is jplay service messing with the registry outside of playback
JPlay sets TimerResolution to 0.5 ms. This timing gives strained sound as it is too tight.
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
users of Server2012 are normally using this account as it is the default one on this OS.sbgk wrote:think it's made a difference, more transparent ?sbgk wrote:anyone tried running as a super administrator account ?
http://en.kioskea.net/faq/29289-windows ... count-mode
just enabled it, hasn't made it sound worse.
It is on the Windows 8/8.1 (more focussed on consumer level users) that is disabled by default.
After enabling it, you are logged in as user Administrator I assume, otherwise I wouldn't expect any differences.
Also in the Local Security Policy there are some settings that influence how this super-administrator and usesr from the Administrator Group are treated, securitywise.
Cheers
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
-
- Posts: 2491
- Joined: Mon Oct 07, 2013 11:09 pm
Re: MQN
5.20 see is superb!
nothing to criticise apart from micro-tuning! moving forward.
micro-details is abstracted away into dryness. result sounds very clean. also less real.
e.g. guitar almost shines and nearly feels watery. not quite. only one reason i think. micro is slightly drier than norm.
vocal also... rather clean.
no lean no strain no harsh no weird nothing. one of the highest listenable version.
nothing to criticise apart from micro-tuning! moving forward.
micro-details is abstracted away into dryness. result sounds very clean. also less real.
e.g. guitar almost shines and nearly feels watery. not quite. only one reason i think. micro is slightly drier than norm.
vocal also... rather clean.
no lean no strain no harsh no weird nothing. one of the highest listenable version.
Re: MQN
didn't like it, so back to normalsbgk wrote:think it's made a difference, more transparent ?sbgk wrote:anyone tried running as a super administrator account ?
http://en.kioskea.net/faq/29289-windows ... count-mode
just enabled it, hasn't made it sound worse.