Anything to do with computer audio, hardware, software etc.
sbgk
Posts: 1950 Joined: Mon Oct 07, 2013 9:45 pm
Post
by sbgk » Wed Jan 29, 2014 11:44 pm
nige2000 wrote: sbgk wrote: using -a 1 b: 1000:200000 -q with default amanero driver settings getting 0.6 % cpu system interrupts.
Still like the large decode buffer.
can you go under 1000 streaming seems to help as much as the low latency
can get it to 300, that sounds better, thanks. thought 1000 was the min I could get when I tried before.
300 is a bit wearing, 400 sounds better for me
nige2000
Posts: 4253 Joined: Thu Feb 14, 2013 10:47 am
Location: meath
Post
by nige2000 » Wed Jan 29, 2014 11:54 pm
sbgk wrote: nige2000 wrote: sbgk wrote: using -a 1 b: 1000:200000 -q with default amanero driver settings getting 0.6 % cpu system interrupts.
Still like the large decode buffer.
can you go under 1000 streaming seems to help as much as the low latency
can get it to 300, that sounds better, thanks. thought 1000 was the min I could get when I tried before.
wasn't that excited about big decode buffer maybe 4000- 20000
might be no harm to recheck with the new streaming buffer
sd card player, modded soekris dac, class a lifepo4 amp or gb class a/b amp, diy open baffle speakers based on project audio mundorf trio 10's
sbgk
Posts: 1950 Joined: Mon Oct 07, 2013 9:45 pm
Post
by sbgk » Thu Jan 30, 2014 12:04 am
nige2000 wrote:
wasn't that excited about big decode buffer maybe 4000- 20000
might be no harm to recheck with the new streaming buffer
8000 sounds better, tuneable sound - MQn didn't have that
nige2000
Posts: 4253 Joined: Thu Feb 14, 2013 10:47 am
Location: meath
Post
by nige2000 » Thu Jan 30, 2014 12:13 am
sbgk wrote: nige2000 wrote:
wasn't that excited about big decode buffer maybe 4000- 20000
might be no harm to recheck with the new streaming buffer
8000 sounds better, tuneable sound - MQn didn't have that
Aleg's 8000 decode buffer
yea its good, i was liking 4000 with the last version
anyway these settings seem important
sd card player, modded soekris dac, class a lifepo4 amp or gb class a/b amp, diy open baffle speakers based on project audio mundorf trio 10's
sbgk
Posts: 1950 Joined: Mon Oct 07, 2013 9:45 pm
Post
by sbgk » Thu Jan 30, 2014 12:20 am
nige2000 wrote: sbgk wrote: nige2000 wrote:
wasn't that excited about big decode buffer maybe 4000- 20000
might be no harm to recheck with the new streaming buffer
8000 sounds better, tuneable sound - MQn didn't have that
Aleg's 8000 decode buffer
yea its good, i was liking 4000 with the last version
anyway these settings seem important
smaller values, higher frequency of buffer filling etc, smaller amount of noise at constant period, too small = digital
larger size = loss of detail, less digital sounding, less uniform period, larger lumps of electrical noise, this was all explained by cics/cplay project. Choose your poison.
nige2000
Posts: 4253 Joined: Thu Feb 14, 2013 10:47 am
Location: meath
Post
by nige2000 » Thu Jan 30, 2014 12:30 am
bit like a mixer valve for a tap
not too hot not too cold
sd card player, modded soekris dac, class a lifepo4 amp or gb class a/b amp, diy open baffle speakers based on project audio mundorf trio 10's
sbgk
Posts: 1950 Joined: Mon Oct 07, 2013 9:45 pm
Post
by sbgk » Thu Jan 30, 2014 12:42 am
nige2000 wrote: bit like a mixer valve for a tap
not too hot not too cold
nah, we bypass the mixer
difference between a centrifugal pump and a reciprocating pump perhaps.
anyway, the new version sounds better with the 400:8000 for me and happy that it's improved on previous version.
Sounds musical to me, what do the critical listeners think ?
If I can get a similar lift with pa pgo then I can stop here and get the missing functionality back.
jrling
Posts: 398 Joined: Tue Oct 08, 2013 7:54 pm
Location: London
Post
by jrling » Thu Jan 30, 2014 11:16 am
sbgk wrote: using -a 1 b: 1000:200000 -q with default amanero driver settings getting 0.6 % cpu system interrupts.
Anyone else getting high % Windows System Interrupts? We are running WS2012 R2.
Maplin XM21X 12V float charging A123 26650 LiFePO4 battery/Maxwell Supercap PSU for Mitac PD10-BI J1900 Bay Trail, WTFPlay, Hiface Evo, Bow Technologies 1704 NOS DAC, StereoKnight TVC, Quad II monoblocks, ZU Audio Druid Mk4/Method Sub
sima66
Posts: 872 Joined: Tue Oct 08, 2013 7:35 pm
Location: Canada
Post
by sima66 » Thu Jan 30, 2014 5:03 pm
I'm trying to keep up with you guys here and try to understand if the "Squeezelite Affinityset 4core.exe" should be placed in the same bin like the other excels? Should both be in the bin, in the same time?
I5 4440+TXCOmobo+JCAT Femto-Intona-JKRegen+HynesPS+TeraDak ATX-820W=JCATusb=DiverterHR=Wadia 931/922(GNSC mod)=PassLabsXA100.5=2xValhalla=Stacked&moded ESL57+JAS SuperTweet+2MJ Acoustics Ref.I
4SteinHarmonizers;RR777;Tellus;StillpointsUltraSS
nige2000
Posts: 4253 Joined: Thu Feb 14, 2013 10:47 am
Location: meath
Post
by nige2000 » Thu Jan 30, 2014 5:08 pm
sima66 wrote: I'm trying to keep up with you guys here and try to understand if the "Squeezelite Affinityset 4core.exe" should be placed in the same bin like the other excels? Should both be in the bin, in the same time?
yes in the bin file along with everything else
sd card player, modded soekris dac, class a lifepo4 amp or gb class a/b amp, diy open baffle speakers based on project audio mundorf trio 10's