everything powered from battery seems improvedjkeny wrote:So let me ask some more Qs, please:
- is the 4 pin CPU socket only providing power to CPU - this is powered from battery?
- the other motherboard socket is supplied by the Pico?
- are the PSes listed in the order of importance for the sound? i.e. CPU, storage, OS or is it CPU OS, storage?
- you mentioned 2 supplies sounding detailed but lacking body & 3 bringing back that body - what was the 3rd PS supplying?
as far as i remember the 12v 4 pin supplies only the cpu but this is broken down further to 3 or 4 different lower voltages for the processor. i have this powered by 12 volt vehicle battery
the 24 pin motherboard socket is supplied by 12 volt vehicle battery via pico psu
whether linear or battery seems to be a priority to separate out the power supplies
i only know what ive tried so i started out with three linears, cpu pico and os(usb3/ssd) which sounds great and still does
tried 1 battery to pico psu and pico supplying cpu and os= great smoothness and detail with huge loss in body and dynamics of a unacceptable scale, but gave enough encouragement to investigate further.
then 3 aa batteries to os = better body, better dynamics along with improved overall but still not as same level of body as tri-linear
then 12v battery power to cpu = bingo!!! (you've forgotten your testing sq and youve been taken into the music)
ive tried all different combinations all sound good
order of importance
3 supplies whether battery or linear
battery power to os +60%
battery to cpu +25%
battery to pico +15%
Percentage of the improvement in relation to replacing linear in each instance
only thing that wasnt great was switching linear for battery for the os in a tri battery system
single battery systems lack body and dynamics adding the second and third battery recoup that
(note i tried powering the ciunas via anker battery pack along with usb3 os and lowered sq substantially)