Vintage Mission 775S turntable unit (no arm)...

For Sale/Wanted
Forum rules
Note that Tir Na HiFi does not take any responsibility for transactions arranged or carried out here. It is up to the seller and buyer to check each other out! Please be sensible folks, and if there is something you think is wrong, let a mod know, OK?

To make it as clear as we can, here are some simple guidelines:

a) like any forum, the success of tirnahifi is entirely dependent on discussion. All members are encouraged to participate in discussion of music, hifi, etc.
b) tirnahifi is not designed to be, nor intended to be, a marketplace. Any member who uses the site merely for selling will be looked on suspiciously.
c) those members who choose to sell on the site should be aware that the mods do keep an eye on the stuff for sale, plus the demeanour of the seller. Sometimes we may lock/delete/ban a sales thread on this basis.
d) honesty is paramount in all selling transactions. Commercial sellers who label themselves as such are accepted at the discretion of the moderating team.
e) All ads have to include information about age, price, provenance, etc.
f) THE MODERATING TEAM RESERVE THE RIGHT TO REMOVE ANY ADS AT THEIR DISCRETION.
g) Commercial sellers should approach any of the moderation team in advance of posting. First time commercial posts without moderator contact will be removed.
Post Reply
Dowser
Posts: 153
Joined: Mon Jan 18, 2010 12:05 pm

Vintage Mission 775S turntable unit (no arm)...

Post by Dowser »

Vintage Mission 775S turntable unit. I bought this originally with a Mission 774 arm, that I have transplanted onto my LP12.

I intended to buy a SME-Rega adaptor plate off eBay (~£20) and mount my RB250 on this for use in an office system. Never got around to it though :-)

Mechanically perfect, motor and bearing cleaned and re-lubed. As can be seen in the photos, cosmetically challenged though - they all did this, the laminate causes cracks in the paint. I would have sanded and re-painted...actually, no, I probably wouldn't have...but you could :-)

The lid is actually in good condition, tape residue will clean off - but both hinges broken. Arm fit is SME.

Very heavy (the platter is lead filled underneath!) - I also have the original external phono lead, but it's rubbish quality!

Would also be a good base for a DIY turntable. €50?

I'll be posting up a rewired RB250 in due course too, if you need a complete set-up.

Image

Image

Image

Image

Thanks, Richard
Top
Dowser
Posts: 153
Joined: Mon Jan 18, 2010 12:05 pm

Re: Vintage Mission 775S turntable unit (no arm)...

Post by Dowser »

Sold, thanks
Top
Post Reply

Return to “Classifieds”