|SOLD|Unison Research Unico Primo Hybrid Integrated Amplifier|SOLD|
Posted: Wed Mar 17, 2021 12:44 pm
For sale:
Unison Research Unico Primo Hybrid Integrated Amplifier
SOLD
Primo is a hybrid integrated amplifier with a valve based pre-amp and a Mosfet based power amp.
Combine fantastically well to produce a fantastic / dynamic sound.
In excellent operational condition, supplied with remote.
>>No phono stage build in
The Unico Primo is a hybrid integrated stereo amplifier capable of delivering not less than 85W RMS continuous on a 8ohm load. As usual for Unison Research amplifiers, the declared power is actually lower in order to keep our promises in every condition. With real musical signals running through this amplifier, the maximum power will be even higher. Since this is a hybrid design that mates a powerful amplifier with an ECC83 triode, you get the best of both worlds with the Unico Primo: an amplifier that is powerful enough to drive most loudspeakers, and a sound quality that is usually associated with the finest valve designs.
Specifications
- Output power: >80W RMS on 8Ω
- Output stage: Dynamic A Class POWER MOSFET complementary pair
- Polarization: Classe A Dinamic
- Input stage: Triodi A-Class A
- Valve: 1 x ECC83 (12AX7)
- Sensibilty: 260mV
- Input impedance: 50 kΩ / 47 pF
- Frequency response: -0.1dB@10Hz / -0.5dB@100kHz
- SNR: 90dB
- THD: 0.15% @ 10W, 1kHz
- Negative feedback: 10dB
- Damping Factor: >50
- Inputs: 5 line RCA, 1 tape RCA
- Output: 1 tape RCA, 1 subwoofer RCA
- Output connectors: 4 +4 per Bi-Wiring
- Remote control: Volume, IR
- Power consumption: 380W max
- Dimensions (la x lu x alt): 43.5 x 43 x 9.5 cm
- Net weight: 14 kg
http://www.adverts.ie/22964116
https://www.stereophile.com/content/uni ... -amplifier
Unison Research Unico Primo Hybrid Integrated Amplifier
SOLD
Primo is a hybrid integrated amplifier with a valve based pre-amp and a Mosfet based power amp.
Combine fantastically well to produce a fantastic / dynamic sound.
In excellent operational condition, supplied with remote.
>>No phono stage build in
The Unico Primo is a hybrid integrated stereo amplifier capable of delivering not less than 85W RMS continuous on a 8ohm load. As usual for Unison Research amplifiers, the declared power is actually lower in order to keep our promises in every condition. With real musical signals running through this amplifier, the maximum power will be even higher. Since this is a hybrid design that mates a powerful amplifier with an ECC83 triode, you get the best of both worlds with the Unico Primo: an amplifier that is powerful enough to drive most loudspeakers, and a sound quality that is usually associated with the finest valve designs.
Specifications
- Output power: >80W RMS on 8Ω
- Output stage: Dynamic A Class POWER MOSFET complementary pair
- Polarization: Classe A Dinamic
- Input stage: Triodi A-Class A
- Valve: 1 x ECC83 (12AX7)
- Sensibilty: 260mV
- Input impedance: 50 kΩ / 47 pF
- Frequency response: -0.1dB@10Hz / -0.5dB@100kHz
- SNR: 90dB
- THD: 0.15% @ 10W, 1kHz
- Negative feedback: 10dB
- Damping Factor: >50
- Inputs: 5 line RCA, 1 tape RCA
- Output: 1 tape RCA, 1 subwoofer RCA
- Output connectors: 4 +4 per Bi-Wiring
- Remote control: Volume, IR
- Power consumption: 380W max
- Dimensions (la x lu x alt): 43.5 x 43 x 9.5 cm
- Net weight: 14 kg
http://www.adverts.ie/22964116
https://www.stereophile.com/content/uni ... -amplifier