For Sale - TDL RTL3 Mark 2 Transmission Line Floor Speakers

For Sale/Wanted
Forum rules
Note that Tir Na HiFi does not take any responsibility for transactions arranged or carried out here. It is up to the seller and buyer to check each other out! Please be sensible folks, and if there is something you think is wrong, let a mod know, OK?

To make it as clear as we can, here are some simple guidelines:

a) like any forum, the success of tirnahifi is entirely dependent on discussion. All members are encouraged to participate in discussion of music, hifi, etc.
b) tirnahifi is not designed to be, nor intended to be, a marketplace. Any member who uses the site merely for selling will be looked on suspiciously.
c) those members who choose to sell on the site should be aware that the mods do keep an eye on the stuff for sale, plus the demeanour of the seller. Sometimes we may lock/delete/ban a sales thread on this basis.
d) honesty is paramount in all selling transactions. Commercial sellers who label themselves as such are accepted at the discretion of the moderating team.
e) All ads have to include information about age, price, provenance, etc.
f) THE MODERATING TEAM RESERVE THE RIGHT TO REMOVE ANY ADS AT THEIR DISCRETION.
g) Commercial sellers should approach any of the moderation team in advance of posting. First time commercial posts without moderator contact will be removed.
Post Reply
pm2097
Posts: 25
Joined: Wed Jun 24, 2015 3:19 pm

For Sale - TDL RTL3 Mark 2 Transmission Line Floor Speakers

Post by pm2097 »

******i have bought a 30 euro sheet of 20mm thick reticulated black speaker foam and will be fitting to the bass ports later****** (original foams perished over time, which is totally common, and is being replaced by correct type of speaker foam))

TDL RTL3 Mark 2 Transmission Line Floorstanding Speakers

These are proper, original TDL speakers,before the company name was sold to a mass producer. For anyone who doesnt know, the Bass is PHENOMENAL with these speakers, due to the transmission line design

Specifications :
System..........................................Reflex transmission line loading floor standing
Drive Units.....................................Two 172 mm loaded polypropylene cone with forward roll
- Base Units...................................rubber surround & phase plug - long throw double wound coil on kapton former with bump back magnet yoke
- Tweeter........................................19mm soft dome ferro-fluid cooled
Crossover.......................................Electrical 2 way second order network
Frequency Range............................35Hz - 20kHz
Sensitivity.......................................90dB at 1m for 1 watt
Impedance......................................8 ohm nominal
Amplifier Requirements....................20-120 watts per channel
Wood finishes.................................Ash black or rosewood
Dimensions(w x d x h).....................20 x 39.5 x 91 cm
Weight...........................................16kg per side

500 euro

collection only as these are enormous and very heavy
Post Reply