MQN

Anything to do with computer audio, hardware, software etc.
sbgk
Posts: 1950
Joined: Mon Oct 07, 2013 9:45 pm

Re: MQN

Post by sbgk »

erin wrote:
sbgk wrote:uploaded 2.69 sse2 intel, this has the new method of prefetching and the raw setting. Seems to have everything, sweet, detailed, good bass, good vocals. Shall stop here and base the other versions on this one.
listening on Win8.1

I think this version has very much upwards slanted sound.

Its going a long way away from a natural clean studio sound and entering some other weird territory.

This version sounds light weight. Bass is nowhere. mids are recessed. Highs are weird, like there is a shimmering distortion.

Apologies, but I need to say what I hear. And I can find no other way to say it. I do not mean to be impolite.
I didn't get full bass until my system had warmed up, thought that I was getting everything in good proportion after that. Shall try it without the raw setting to see if the new prefetch method is a step forward or not.
LowOrbit
Posts: 142
Joined: Tue Oct 08, 2013 9:50 am

Re: MQN

Post by LowOrbit »

Just did the 8.1 upgrade on the audio pc this morning and had a quick listen.

It seemed cleaner and more relaxed with 2.66 mfence.

I have just had a listen to 2.69 and it certainly does not lack bass on my system, nor can I detect any oddities of balance. In fact it sounds very enjoyable, still with the rich seem of detail and dynamics. Need more time of course but it doesn't seem like a step back in any way.

Mark
RPi/piCorePlayer/Buffalo2/DSP/NCores/Active Impulse H2s
erin
Posts: 62
Joined: Tue Oct 08, 2013 12:54 pm

Re: MQN

Post by erin »

jesuscheung wrote: haha. are you one of those who thinks new is always better the old?
No not at all. Everything is worthy of investigation.

I'm the guy who likes 2.53 :P
There is only so much cake in the world!
When the greedy people want to have more than their fair share, then there is less cake for everyone else.
Buy locally.
Build locally.
Grow locally.
Share locally.
Results in a fair slice of the cake for everyone.
erin
Posts: 62
Joined: Tue Oct 08, 2013 12:54 pm

Re: MQN

Post by erin »

sbgk, when you do your listening are you doing it on Win8.1 or WS 2012 R2?

I haven't installed R2 yet.
There is only so much cake in the world!
When the greedy people want to have more than their fair share, then there is less cake for everyone else.
Buy locally.
Build locally.
Grow locally.
Share locally.
Results in a fair slice of the cake for everyone.
erin
Posts: 62
Joined: Tue Oct 08, 2013 12:54 pm

Re: MQN

Post by erin »

After installing 8.1 do I need to go and do the registry change again as outlined in the MQn readme?
There is only so much cake in the world!
When the greedy people want to have more than their fair share, then there is less cake for everyone else.
Buy locally.
Build locally.
Grow locally.
Share locally.
Results in a fair slice of the cake for everyone.
jesuscheung
Posts: 2491
Joined: Mon Oct 07, 2013 11:09 pm

Re: MQN

Post by jesuscheung »

erin wrote:
jesuscheung wrote: haha. are you one of those who thinks new is always better the old?
No not at all. Everything is worthy of investigation.

I'm the guy who likes 2.53 :P
which version of 2.53? i like the new loop versions.
erin
Posts: 62
Joined: Tue Oct 08, 2013 12:54 pm

Re: MQN

Post by erin »

2.53 sse4 intel eac
There is only so much cake in the world!
When the greedy people want to have more than their fair share, then there is less cake for everyone else.
Buy locally.
Build locally.
Grow locally.
Share locally.
Results in a fair slice of the cake for everyone.
jesuscheung
Posts: 2491
Joined: Mon Oct 07, 2013 11:09 pm

Re: MQN

Post by jesuscheung »

erin wrote:2.53 sse4 intel eac
you are right. this version is great. listening again. new sensation.

i remember this version had earaches when i had Win32PrioritySeparation=18. much earaches have disappeared (still plenty of earaches) after i changed it to 28 with a new clockrate. digital jitter is fascinating.
LowOrbit
Posts: 142
Joined: Tue Oct 08, 2013 9:50 am

Re: MQN

Post by LowOrbit »

erin wrote:After installing 8.1 do I need to go and do the registry change again as outlined in the MQn readme?
Hi Erin

I just did the update today and yes, I needed to readjust the registry settings. So I think it is at least worth checking.

Mark
RPi/piCorePlayer/Buffalo2/DSP/NCores/Active Impulse H2s
cvrle59
Posts: 449
Joined: Tue Oct 08, 2013 12:45 am
Location: Canada

Re: MQN

Post by cvrle59 »

cvrle59 wrote:I am getting an error since I upgraded to Win 8.1
ERROR: The process "mqnplay.exe" with PID 7636 could not be terminated.
Reason: Access is denied.
This happens on loading, but it would continue to play.
Any idea...thanks!
Has anybody with Win 8.1 bumped into this error yet? I still don't know why it's happening.
i3 Haswell, PPAStudio USB3 card and USB Micro cable/Chord Hugo/Nad-275BEE/Harbeth-30.1
Post Reply