Tír Na HiFi

If it is not Haswell (an by the looks of it it is not) it will rather not work unless something has changed in that requirement that I do not know about.

Nevertheless there is no harm in trying. There was a time when my AMD X2 CPU was working fine with Haswell versions ;)

sebna wrote:If it is not Haswell (an by the looks of it it is not) it will rather not work unless something has changed in that requirement that I do not know about.

Nevertheless there is no harm in trying. There was a time when my AMD X2 CPU was working fine with Haswell versions ;)

OK.... thanks

So does anyone know which is the highest revision which will operate?

Hi guys are any of the long time users able to answer this, Gordon?

Ivy Bridge cpu should be able to run sse, avx and avx2 versions until those specific for haswell cpu.
approximate milestones : 'cause I'm too old to catch up with Gordon's work and I missed some downloads
20141129 - mqnplay1644.exe 24 bit 8.91 normal
20141129 - mqnplay1644.exe 24 bit 8.91 avx2
20141224 - mqnplay1644.exe 24 bit 9.06 normal cuinas (dac hard coded ver)
20141224 - mqnplay1644.exe 24 bit 9.06 avx2 cuinas (dac hard coded ver)

20150118 - MQn_r910gk_1644_ks_avx2_399Control_ (my best reference before setting up a haswell)

viewtopic.php?f=15&t=2418&start=6750 page 676
20150212 - (haswell cpu only, test)
20150324 - mqnplay.exe v14 long device name (haswell cpu only)

20150708 - mqnplay.exe haswell v17 win 10.exehaswellv17win10 (haswell cpu and win10)
20150708 - mqnplay.exe haswell v17 2012 r2.exehaswellv172012r2 (haswell cpu and ws2012r2)

20150724 - mqnplay.exe sse4 w 2012 r2 v29.exesse4w2012r2v29 (special ver)
20150724 - mqncontrol.exe sse4 v20.exesse4v20 (special ver)
20150724 - mqnloader.exe sse4 v20.exesse4v20 (special ver)
"uploaded sse4 versions of control/loader v19 and play v29, play is for win 2012 r2 or win 8.1"

made some progress with the multitrack, just need to tidy it up, but the basics are working.

next will be hirez.

Sounds very good. Hope you can make hires in both 32 and 24 bit flavors

Sent from my HTC One using Tapatalk

uploaded control v29, loader v29 and play v96 for multitrack play.

bit of a noise at the end and cpu goes up, but it settles down and mqnplay can then be stopped via task mgr.

playback starts after 5 secs.

Listened to a playlist of three (short) files, and the whole list played fine.
When finished, cpu usage quickly rise to c.25%, and after a few seconds was some noise. Close mqnplay, and no problem.
Big thanks to sbgk for this!!
For sq compared to v93, more listening.
Cheers

that's good news.

v96 is the same code as v93, but the way it's called from control changed which improved it a bit.

sbgk wrote:that's good news.

v96 is the same code as v93, but the way it's called from control changed which improved it a bit.

When starting a playlist I get a few short crackles during the time mqncontrol hasn't yet closed. When mqncontrol terminates the crackles are gone. As it takes only about 5 sec for mqncontrol to disappear I only get 2 or 3 crackles.
Playlist works fine and indeed after the last track the cpu goes up to 25.8% until mqnplay is killed.

No comments on SQ yet (but no immediate and obvious differences of course)