MQN

Anything to do with computer audio, hardware, software etc.
3daudio
Posts: 36
Joined: Wed Apr 23, 2014 10:27 pm

Re: MQN

Post by 3daudio »

Best sse in my setup is still 4.22, tried all the latest sse's. None comes close.

4.22 has a tremendous live characteristic and foot tapping factor. I enjoy this version a lot.

Just thought maybe someone would like to know. -:))
MQn-Player/WinServer12/AudioOptimizer 1.26-> Audioquest Diamond USB -> AR-T Legato II -> AMR DP-777 -> MEG 901K
sbgk
Posts: 1950
Joined: Mon Oct 07, 2013 9:45 pm

Re: MQN

Post by sbgk »

3daudio wrote:Best sse in my setup is still 4.22, tried all the latest sse's. None comes close.

4.22 has a tremendous live characteristic and foot tapping factor. I enjoy this version a lot.

Just thought maybe someone would like to know. -:))
shall check what code it used. Foot tapping seems to be something that could be measured, at last we have a parameter that can be measured. (beats per minute/foot taps per minute) bpm/ftpm - the baft ratio
sbgk
Posts: 1950
Joined: Mon Oct 07, 2013 9:45 pm

Re: MQN

Post by sbgk »

5.62 perhaps better balanced, might be too much, but can be dialled back

quite like the sound of 5.63, shall call it a day there. surprisingly sweet sound, good bass , dynamics, detail.

sweet and loss of detail, 5.64 fixes it.

toodle pip
Aleg
Posts: 1381
Joined: Thu Oct 10, 2013 8:26 pm

Re: MQN

Post by Aleg »

sbgk wrote:5.62 perhaps better balanced, might be too much, but can be dialled back

quite like the sound of 5.63, shall call it a day there. surprisingly sweet sound, good bass , dynamics, detail.

sweet and loss of detail, 5.64 fixes it.

toodle pip

No 5.64 on Google drive?
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
sbgk
Posts: 1950
Joined: Mon Oct 07, 2013 9:45 pm

Re: MQN

Post by sbgk »

Aleg wrote:
sbgk wrote:5.62 perhaps better balanced, might be too much, but can be dialled back

quite like the sound of 5.63, shall call it a day there. surprisingly sweet sound, good bass , dynamics, detail.

sweet and loss of detail, 5.64 fixes it.

toodle pip

No 5.64 on Google drive?
there now
User avatar
satshanti
Posts: 85
Joined: Sat Mar 29, 2014 6:59 pm

Re: MQN

Post by satshanti »

I'd like to request avx versions of the latest release(s) as well. My AMD CPU can handle avx2, but for some reason avx sounds much better, to such an extent that in direct comparisons I even tend to favour sse over avx2! I seem to be the only one here with an AMD CPU, but in case there are any others, I thought I'd mention it.

This discovery also means that testing with 1644 avx2 on my system, as has been happening the last few weeks, may have given skewed results in my case. I did some tests yesterday on the few available 2496 avx versions and found that 5.51 is indeed better than 5.07, but going back to a 2 month old favourite 3.39, it blew 5.51 away in terms of musicality, timing, coherence, solidity and spacial atmospherics. 5.51 did manage to retrieve quite a bit more detail, but at a price that's way too high for me.

I hesitate to ask this, but I would really love to try some 2496 avx versions of milestones in between 3.39 and 5.51, like my old favourite 4.04 for example. :-)

I think at these later stages of polishing up the code, system synergy may play an important role in the final sound quality, particularly how the PC handles the instructions.
uwtfplay on AMD FX8120@1600 RAM@800 FSB@1200 | AQ Jitterbug | Atlas Element USB cable | HiFimeDIY Sabre DAC 2 | NVA Super Sound Pipe | SMSL sApII headphone amp | AKG K702 (or HiFimeDIY UD20 DDX amp | Anti-Cable | Celestion DL6-II)
nige2000
Posts: 4253
Joined: Thu Feb 14, 2013 10:47 am
Location: meath

Re: MQN

Post by nige2000 »

Suspect the cpu architecture will make a difference
3.39 was a 10ms version
5.32 and 5.34 were around 3 ms
5.30 is good too if it works
Although there not perfect But they have musicality flow atmosphere stuff were still missing
Noone else seemed to take to them though
sd card player, modded soekris dac, class a lifepo4 amp or gb class a/b amp, diy open baffle speakers based on project audio mundorf trio 10's
Aleg
Posts: 1381
Joined: Thu Oct 10, 2013 8:26 pm

Re: MQN

Post by Aleg »

satshanti wrote:I'd like to request avx versions of the latest release(s) as well. My AMD CPU can handle avx2, but for some reason avx sounds much better, to such an extent that in direct comparisons I even tend to favour sse over avx2! I seem to be the only one here with an AMD CPU, but in case there are any others, I thought I'd mention it.

This discovery also means that testing with 1644 avx2 on my system, as has been happening the last few weeks, may have given skewed results in my case. I did some tests yesterday on the few available 2496 avx versions and found that 5.51 is indeed better than 5.07, but going back to a 2 month old favourite 3.39, it blew 5.51 away in terms of musicality, timing, coherence, solidity and spacial atmospherics. 5.51 did manage to retrieve quite a bit more detail, but at a price that's way too high for me.

I hesitate to ask this, but I would really love to try some 2496 avx versions of milestones in between 3.39 and 5.51, like my old favourite 4.04 for example. :-)

I think at these later stages of polishing up the code, system synergy may play an important role in the final sound quality, particularly how the PC handles the instructions.

3.39 is the one the played distorted sound on most installations and played only well on the odd machine.
If it was so good, it may pay dividend the find out why it was so distorted on most machines.

As was 5.30
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
jesuscheung
Posts: 2491
Joined: Mon Oct 07, 2013 11:09 pm

Re: MQN

Post by jesuscheung »

satshanti wrote:...but going back to a 2 month old favourite 3.39, it blew 5.51 away in terms of musicality, timing, coherence, solidity and spacial atmospherics....
think that 3.39 has bass reaches low enough makes treble very likable.
don't think another version has same tonality..
when listening to enough versions...
one can tell that when bass reaches low enough... magic happens... stage width is widened for example

listening to it again... sounds better than i remember...
more liquid and shinny that it was...
Aleg
Posts: 1381
Joined: Thu Oct 10, 2013 8:26 pm

make MQn playback DSD-files

Post by Aleg »

I found an easy way to make MQn playback DSD-files into a DoP capable DAC like a Chord Hugo.

It is possible to encapsulate dff or dsf files into a DoP PCM format offline, before playback. There are few converters around that can do this.

These DoP files can be wav-format and therefore can be played back directly using MQn, if MQn would have a 176.4kHz/24-bit version that is.

I have made a few scripts that can convert an SACD-iso into dff and encapsulate the dff into DoP pcm files.

Gordon could you build a 176.4kHz/24-bit version for 32-bit containers so I try the complete playback chain?

Cheers

Aleg
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
Post Reply