Tír Na HiFi

I keep looking at your concoction.

I see you are using the LED card and there seems to be some kind of regulator on the other side - but I thought you were using a battery for supply.

You have me baffled with this one.

When you are so inclined I think this is a project worth a map (please).

The INTONA looked interesting until I saw all of those isolators thanks to SLIGOLAD's kindly submission of photography.

Always interested to hear what your supremely experienced ears think of it.

Take care,

see the momentary switch and its too red leads
thats all you need to worry about
the rest is related to the usb hub(regen mod) and some other experiments that didnt work out

on boot up u press and hold for 3 secs to complete handshake

theres not too many devices that will take a dose of reverse polarity lifepo4 think of the current

id like to mod an intona but not sure id like to do it enough to pay the money for it and it did prove a little fickle as we couldnt get it to work with my soekris direct bypassing my built in hub
we also failed to get it working on an "anker" battery supply which was disappointing

Needless to say the card was gone as soon as I touched the second lead to the battery.

Smoke was generated immediately along with my berating myself effusively. I had just looked at the battery and somehow, mindlessly, had turned it around. Makes me sick (of myself).

So where are you getting the five volts from? The PC supply?

rickmcinnis wrote:Needless to say the card was gone as soon as I touched the second lead to the battery.

Smoke was generated immediately along with my berating myself effusively. I had just looked at the battery and somehow, mindlessly, had turned it around. Makes me sick (of myself).

So where are you getting the five volts from? The PC supply?

sometimes i think you cant read

we momentarily inject 3.3v into the usb5v input for handshake
3.3v is enough to do it

nige2000 wrote: id like to mod an intona but not sure id like to do it enough to pay the money for it and it did prove a little fickle as we couldnt get it to work with my soekris direct bypassing my built in hub
we also failed to get it working on an "anker" battery supply which was disappointing

Tried the Intona on the Meitner this evening and with the long red PPA USB cable it would not lock so I stuck one of the shorter Supra cables between the Intona and Meitner and it locks every time now without Regen needed.

It is not that I cannot read, it is that sometimes I am not sure what I read is what you meant.

You can write in a shorthand that assumes the reader knows what you know. So when this reader does not know, or I am unsure if that is what you meant, I will ask again! I have my own ingrained assumptions about things so if what you say does not agree with what I think I know I need the statement to be made with conviction!

If you put things as clearly as you did with that post there would be no confusion and, likely, but I know better than to promise, not a second asking of the question.

I did not know that this handshake voltage was not critical.

AS ALWAYS, thanks for the help.

rickmcinnis wrote:It is not that I cannot read, it is that sometimes I am not sure what I read is what you meant.

You can write in a shorthand that assumes the reader knows what you know. So when this reader does not know, or I am unsure if that is what you meant, I will ask again! I have my own ingrained assumptions about things so if what you say does not agree with what I think I know I need the statement to be made with conviction!

If you put things as clearly as you did with that post there would be no confusion and, likely, but I know better than to promise, not a second asking of the question.

I did not know that this handshake voltage was not critical.

AS ALWAYS, thanks for the help.

ok i though i wrote it clearer
+3.3v into the usb +5 input marked V+ under the usb b socket

Sligolad wrote:

nige2000 wrote: id like to mod an intona but not sure id like to do it enough to pay the money for it and it did prove a little fickle as we couldnt get it to work with my soekris direct bypassing my built in hub
we also failed to get it working on an "anker" battery supply which was disappointing

Tried the Intona on the Meitner this evening and with the long red PPA USB cable it would not lock so I stuck one of the shorter Supra cables between the Intona and Meitner and it locks every time now without Regen needed.

thought we tried the two supras with the intona and soekris bypassing the reclocking hub?

nige2000 wrote:

Sligolad wrote:

nige2000 wrote: id like to mod an intona but not sure id like to do it enough to pay the money for it and it did prove a little fickle as we couldnt get it to work with my soekris direct bypassing my built in hub
we also failed to get it working on an "anker" battery supply which was disappointing

Tried the Intona on the Meitner this evening and with the long red PPA USB cable it would not lock so I stuck one of the shorter Supra cables between the Intona and Meitner and it locks every time now without Regen needed.

thought we tried the two supras with the intona and soekris bypassing the reclocking hub?

Yea, in Tony's, we tried the Supra cable (short?) instead of the PPA cable (long?) with the Soekris DAC & it still didn't work - seems to be sensitive to signal quality - thinking about it, we probably should have tried the Regen before the Intona just to get a clean 5V supply into the Intona as the 5V injection through the adapter didn't work

rickmcinnis wrote:Needless to say the card was gone as soon as I touched the second lead to the battery.

Smoke was generated immediately along with my berating myself effusively. I had just looked at the battery and somehow, mindlessly, had turned it around.

I really worry for the Asian economies if Rick (and dare I say Nigel) hang up their soldering irons! I do however admire their chutzpah (from a distance). I would never dare.