experimentation continues with tweeter baffles
was rather impressed with the finish
initial testing proves improvements in areas of detail, coherence, focus and tautness
however a little loss of that nice open airy sound it has/had
just need to try some minor adjustments
so far so good though
sd card player, modded soekris dac, class a lifepo4 amp or gb class a/b amp, diy open baffle speakers based on project audio mundorf trio 10's
There are still plenty of options before you get the grinder out.(Apologies to Georgi)
I'd start with running a centre check file to ensure speakers are wired up correctly , then try speaker placement/toe-in/toe-out/tilt.
I think it's worth reversing both tweeter connections to change phase also contrast with just one reversed.
I still think if you look at that mounting almost as a waveguide, its a much narrower than the way it was originally, with the MDF. That alone might account for the differences. I'd try Kens suggestions and also try lining the rebate with thin foam.
They did sound amazing...had some goosebumps hearing the track Melancholia by Van Morrison today.
Next speakers could very well be Pure Audio Trio's after hearing these.....