don't know why that should be, v123 is just different by one alignment change which shouldn't stop it working.Aleg wrote:All combinations with play123 don't give any sound.
Using same combinations with play122 all play just fine
MQN
Re: MQN
janh wrote:I have mixed result with latest versions:
play v121, control v32, counter v2, loader v29 give fine sound.
Then I have tried some newer versions, and I only get distorted sound:
play121, control32, counter v4
play123, control32, counter v8 as well as v11
all these only give distorted sound
have uploaded v13 15 and v13 19, see if 15 fixes your problem
Re: MQN
I just spot th error, I had copied a Win 10 instead of 2012.sbgk wrote:don't know why that should be, v123 is just different by one alignment change which shouldn't stop it working.Aleg wrote:All combinations with play123 don't give any sound.
Using same combinations with play122 all play just fine
So v123 runs OK here.
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
Re: MQN
play121/123 and counter v13 15 give ok sound, except cracking sounds (2 crack/sec).sbgk wrote:janh wrote:I have mixed result with latest versions:
play v121, control v32, counter v2, loader v29 give fine sound.
Then I have tried some newer versions, and I only get distorted sound:
play121, control32, counter v4
play123, control32, counter v8 as well as v11
all these only give distorted sound
have uploaded v13 15 and v13 19, see if 15 fixes your problem
play 123 with v13 19 give a somewhat distorted sound and also continuous cracking.
Gigabyte H97M-D3H with PPA OCXO module. i7-4790T, 800MHz. 8GB Ram, 800MHz.
PPA 2-rail LPSU & Pico. JCAT battery for OS-SSD and PPA v3 USBcard.
Server 2012 R2, AO 1.40. APL HiFi DAC-S, upd. Only use 1644 .wav
PPA 2-rail LPSU & Pico. JCAT battery for OS-SSD and PPA v3 USBcard.
Server 2012 R2, AO 1.40. APL HiFi DAC-S, upd. Only use 1644 .wav
Re: MQN
Yes, play v123 with counter v13 10, v13 5 and v14 10 all play fine, and no crackling.sbgk wrote:uploaded counter v13 10 and v13 5, see if they stop the crackling.
However play v123 with counter v14 give distorted sound, like earlier v123 with counter v8 and v11.
Gigabyte H97M-D3H with PPA OCXO module. i7-4790T, 800MHz. 8GB Ram, 800MHz.
PPA 2-rail LPSU & Pico. JCAT battery for OS-SSD and PPA v3 USBcard.
Server 2012 R2, AO 1.40. APL HiFi DAC-S, upd. Only use 1644 .wav
PPA 2-rail LPSU & Pico. JCAT battery for OS-SSD and PPA v3 USBcard.
Server 2012 R2, AO 1.40. APL HiFi DAC-S, upd. Only use 1644 .wav
Re: MQN
Yes. For me mqncounter v14 10 is fine, and v14 is bad.elaprince wrote:Did you try v14.10 mqncounter?
Gigabyte H97M-D3H with PPA OCXO module. i7-4790T, 800MHz. 8GB Ram, 800MHz.
PPA 2-rail LPSU & Pico. JCAT battery for OS-SSD and PPA v3 USBcard.
Server 2012 R2, AO 1.40. APL HiFi DAC-S, upd. Only use 1644 .wav
PPA 2-rail LPSU & Pico. JCAT battery for OS-SSD and PPA v3 USBcard.
Server 2012 R2, AO 1.40. APL HiFi DAC-S, upd. Only use 1644 .wav
Re: MQN
Good to hear that
I have notice one thing
V14,v124 plays fine when I use OS on ram
But when I boot OS from SSD I get distorted sound wondering why
Gordon can you chime in with idea why is that happening?
Thanks
I will try v14.10 see if that fix it
Aleg are you using OS on ram or normal drive boot?
I have notice one thing
V14,v124 plays fine when I use OS on ram
But when I boot OS from SSD I get distorted sound wondering why
Gordon can you chime in with idea why is that happening?
Thanks
I will try v14.10 see if that fix it
Aleg are you using OS on ram or normal drive boot?