Intel server board S1200V3RPL

[nige2000]

Thanks
What would you recommend Nige for linear power supply??

Where you from ?
Is it 110 v or 220v?

How much plug and play is required or are you the diy type?

[elaprince]

I am Adam friend
from Canada
Plug and play best but have a friend that might do it for me
Thanks Nige

[nige2000]

I am Adam friend
from Canada
Plug and play best but have a friend that might do it for me
Thanks Nige

think i remember you at computeraudiophile when we were trying to get that audiophile windows to go working
seems like a very long time ago

canada is expensive for these type of things

im not sure if the intel boards work without power management so id be inclined to suggest either a teradak psu or leadex superflower 750w
or evga over with you
http://www.newegg.ca/Product/Product.as ... -_-Product

of course the teradak will be better
but the 750w smps atx supply will almost be as good as a pico with an excellent linear psu and its plug and play

[elaprince]

http://www.amazon.ca/EVGA-SuperNOVA-Cer ... B00IKDETOW
This is OK or not really?

[nige2000]

http://www.amazon.ca/EVGA-SuperNOVA-Cer ... B00IKDETOW
This is OK or not really?

is ok
best/simplest std config
to better this supply it will involve a teradak and/or alot of diy electronics including batteries etc etc

[elaprince]

Thank you
Which Teradak would you recommend? 350 or 250?
Thanks

[nige2000]

Thank you
Which Teradak would you recommend? 350 or 250?
Thanks

It shouldn't matter a whole lot
But I have seen better dynamics with larger power supplies
You do realise there's no endpoint to this

[elaprince]

Yes never ending journey lol
Thank you Nige
As far as ram goes any recommendations?

[elaprince]

What do you think about Paul Pang dual rail PSU??

[elaprince]

any of these below would be good?

http://www.ebay.com/itm/TeraDak-DC-280W ... 1c25c3041a

http://www.ebay.com/itm/TeraDak-DC24V-6 ... 1e8c232301