MQN

Anything to do with computer audio, hardware, software etc.
sbgk
Posts: 1950
Joined: Mon Oct 07, 2013 9:45 pm

Re: MQN

Post by sbgk »

had 1 setting wrong in mqnplay, have uploaded an aa 3 and aleg 2 version, is it too much ?
s.nickols
Posts: 6
Joined: Tue Jan 21, 2014 12:25 am

Re: MQN

Post by s.nickols »

Hi Gordon,

Below is the Dev. ID for my USB LEGATO Converter, if you can find the time to prep I can give it a go:

\\?\usb#vid_0451&pid_1021&mi_00#6&1da82060&0&0000#{6994ad04-93ef-11d0-a3cc-00a0c9223196}\global
0

My LEGATO USB Converter was designed to decode only 16/44.

As always, thanks for your efforts!!
Steve
DELL Laptop with SSD & I5x4200U, Windows 8.1-UD#1, AR-T Legato USB-SPDIF Converter (16/44100 only), Resolution Audio Opus 21 CD/DAC (GNSC Mods), RA Opus 30 Amp, Harbeth Monitor 30, REL B2 Sub, DSPeaker 8033c Anti-Mode Sub EQ, AR-T & DNM Cabling
TioFrancotirdor
Posts: 52
Joined: Thu Sep 18, 2014 10:29 am

Re: MQN

Post by TioFrancotirdor »

Hi Gordon. We had listening session yeastarday. For us differences between 8.92 v15 avx2 and 8.92 are easily noticable. In our system v15 is more "tight", more dynamic and rythm. For me sound is "heavier" also.
Eventually we and up listening with v15 and like it better.
ASUS-H81i Plus, i3 4360, 8GB RAM, Linear PSU. USB/PCI PPA Studio V2.
Ubuntu Live USB in RAM
Soekris R2R Salas Ref D powered -> Modulus 86 -> MA Silver 8
Aleg
Posts: 1381
Joined: Thu Oct 10, 2013 8:26 pm

Re: MQN

Post by Aleg »

The fixed device versions seem to have 'more authority' in playback, presenting the music in a more firm (or heavier as TioFrancotirdor says) manner.
Which I like thusfar, as I have played not much music or styles yet, just solo classical piano. But the representation of the old recording is just great, much better than before, better and clearer insight.

I also have the oddity that after reboot the fixed device version won't give sound until I have played a non-fixed version and after that it runs immediately each time.

Great work

Cheers

Aleg
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
jrling
Posts: 398
Joined: Tue Oct 08, 2013 7:54 pm
Location: London

Re: MQN

Post by jrling »

Crash on start.
Error "mqndevinfo.exe has stopped working"

+1
Gordon - is there any manual way that we three who cannot get mqndevinfo.exe to run, can extract the ID for you? Is it in the Registry for instance?

Thanks
Jonathan
Maplin XM21X 12V float charging A123 26650 LiFePO4 battery/Maxwell Supercap PSU for Mitac PD10-BI J1900 Bay Trail, WTFPlay, Hiface Evo, Bow Technologies 1704 NOS DAC, StereoKnight TVC, Quad II monoblocks, ZU Audio Druid Mk4/Method Sub
Aleg
Posts: 1381
Joined: Thu Oct 10, 2013 8:26 pm

Re: MQN

Post by Aleg »

jrling wrote:
Crash on start.
Error "mqndevinfo.exe has stopped working"

+1
Gordon - is there any manual way that we three who cannot get mqndevinfo.exe to run, can extract the ID for you? Is it in the Registry for instance?

Thanks
Jonathan

Jonathan

I seriously doubt the quality of the Windows installation if it cannot run these simple programs.
Are you confident your windows installation is OK?

Cheers

Aleg
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
sbgk
Posts: 1950
Joined: Mon Oct 07, 2013 9:45 pm

Re: MQN

Post by sbgk »

Aleg wrote:The fixed device versions seem to have 'more authority' in playback, presenting the music in a more firm (or heavier as TioFrancotirdor says) manner.
Which I like thusfar, as I have played not much music or styles yet, just solo classical piano. But the representation of the old recording is just great, much better than before, better and clearer insight.

I also have the oddity that after reboot the fixed device version won't give sound until I have played a non-fixed version and after that it runs immediately each time.

Great work

Cheers

Aleg
did you try aleg 2 ? any comment.
Aleg
Posts: 1381
Joined: Thu Oct 10, 2013 8:26 pm

Re: MQN

Post by Aleg »

Sbgk

That was with aleg 2!
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
taggart
Posts: 117
Joined: Mon Oct 07, 2013 10:44 pm
Location: Cologne

Re: MQN

Post by taggart »

Have a WaveIO and MQndefInfo.exe gives following output:

\\?\tusbaudio_enum#vid_20a0&pid_4143&ks#0330#{6994ad04-93ef-11d0-a3cc-00a0c9223196}\pcm_out_02_00
0

Would be nice to try a fixed AVX version.

Christoph
sbgk
Posts: 1950
Joined: Mon Oct 07, 2013 9:45 pm

Re: MQN

Post by sbgk »

jrling wrote:
Crash on start.
Error "mqndevinfo.exe has stopped working"

+1
Gordon - is there any manual way that we three who cannot get mqndevinfo.exe to run, can extract the ID for you? Is it in the Registry for instance?

Thanks
Jonathan
run as administrator ?
set compatability mode to win8 or win7 ?

the code is a cut down of the 8.92 normal version, does that work ?

fails on my i3, so shall investigate
Last edited by sbgk on Sat Dec 13, 2014 12:09 pm, edited 1 time in total.
Post Reply