+1John Dot wrote:Crash on start.sbgk wrote:uploaded mqndevinfo which outputs the device name and pin id, I'll try and make a hard coded mqnplay version if you post these details. The hard coded device version sounds better than the auto device versions.
just double click on it
Error "mqndevinfo.exe has stopped working"
MQN
Re: MQN
Maplin XM21X 12V float charging A123 26650 LiFePO4 battery/Maxwell Supercap PSU for Mitac PD10-BI J1900 Bay Trail, WTFPlay, Hiface Evo, Bow Technologies 1704 NOS DAC, StereoKnight TVC, Quad II monoblocks, ZU Audio Druid Mk4/Method Sub
Re: MQN
Wow, .....sbgk wrote:uploaded an oct and aleg version
also did an aa and tf v15 version as the previous aa version wasn't compiled using vs 2015, can you test to see if there's a difference.
I need to listen more for any other comment.
Nice feature that playback begins before all tracks are loaded.
Cheers
Aleg
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
-
adolfo.a.aguiar
- Posts: 97
- Joined: Fri Oct 11, 2013 4:22 pm
Re: MQN
There is not a huge difference between aa and aa v15. I found aa v15 to be better in clarity and smoothness.
Both are very satisfying.
Both are very satisfying.
SDTrans384 with 1X5V and 3x3.3V supplied by A123 batteries, Soekris DAM1021 Rev2 with +-12V and 3.3V supplied by A123 batteries, Salas hotrodded DCB1, LM3875 Gainclone and IPL Acoustics S2TLM transmission line speakers
Re: MQN
A pity, mine is not working - no sound :(sbgk wrote:uploaded an oct and aleg version
...and I am so curious ;)
Coax tractrix horn system 2 corner subwoofer / 6 full digital amplifier D802 floating PSU 12V battery / digital XO/DRC / 2 PC floating PSU picoless battery/Mutec REF 10/2x Mutec MC3.1+ USB floating PSU 6V/FireFace UCX floating PSU 12V battery/Mutec MC-4
-
adolfo.a.aguiar
- Posts: 97
- Joined: Fri Oct 11, 2013 4:22 pm
Re: MQN
Octagon,
I would try to play a couple of times before giving up. In my system, in average, 1 play fails each 3 attempts.
I would try to play a couple of times before giving up. In my system, in average, 1 play fails each 3 attempts.
SDTrans384 with 1X5V and 3x3.3V supplied by A123 batteries, Soekris DAM1021 Rev2 with +-12V and 3.3V supplied by A123 batteries, Salas hotrodded DCB1, LM3875 Gainclone and IPL Acoustics S2TLM transmission line speakers
Re: MQN
Yeah, is working in VHD. Now I can test running from RAM. :Dsbgk wrote:uploaded oct 2, think there was a mistake in the name
Thanks a lot
Thomas
Coax tractrix horn system 2 corner subwoofer / 6 full digital amplifier D802 floating PSU 12V battery / digital XO/DRC / 2 PC floating PSU picoless battery/Mutec REF 10/2x Mutec MC3.1+ USB floating PSU 6V/FireFace UCX floating PSU 12V battery/Mutec MC-4
Re: MQN
The improvement of the hardcoded 8.92 vs 8.92 avx2 is surprising to me.
How to explain the differente in sq: Instruments are better defined, just a bit clearer and transparent but that seems to have a bigger impact on how you recognize the whole room. I think the timing benefits from the hardcoding.
Anne Bisson sounds even more fascinating "With a little help from my friends". Thanks for the great work Gordon!
Thomas
P.S. There is a small drop some seconds before playing starts.
How to explain the differente in sq: Instruments are better defined, just a bit clearer and transparent but that seems to have a bigger impact on how you recognize the whole room. I think the timing benefits from the hardcoding.
Anne Bisson sounds even more fascinating "With a little help from my friends". Thanks for the great work Gordon!
Thomas
P.S. There is a small drop some seconds before playing starts.
Coax tractrix horn system 2 corner subwoofer / 6 full digital amplifier D802 floating PSU 12V battery / digital XO/DRC / 2 PC floating PSU picoless battery/Mutec REF 10/2x Mutec MC3.1+ USB floating PSU 6V/FireFace UCX floating PSU 12V battery/Mutec MC-4
Re: MQN
+ 1jrling wrote:+1John Dot wrote:Crash on start.sbgk wrote:uploaded mqndevinfo which outputs the device name and pin id, I'll try and make a hard coded mqnplay version if you post these details. The hard coded device version sounds better than the auto device versions.
just double click on it
Error "mqndevinfo.exe has stopped working"