MQN

Anything to do with computer audio, hardware, software etc.
tony
Posts: 3144
Joined: Mon Jan 18, 2010 2:36 pm

Re: MQN

Post by tony »

No sse2 version of 5.14 so not in a position to compare Aleg. My understanding is you have a preference for lots of detail and wonder is that how 5.14 sounds or is there a warm edge to it? Nigel do you think the same about 5.14?
GroupBuySD DAC/First Watt AlephJ/NigeAmp/Audio PC's/Lampi L4.5 Dac/ Groupbuy AD1862 DHT Dac /Quad ESL63's.Tannoy Legacy Cheviots.
m.massimo
Posts: 59
Joined: Sat Jan 11, 2014 1:57 pm

Re: MQN

Post by m.massimo »

cvrle59 wrote: Yes, I always change the name of mqnplay for mqnload, but I haven't got chance to try this new stuff yet. I wasn't sure how mqnload handles it.
Thanks
I use mqnload with ks in the same way, changing the mqnplay name as you said, nothing else.
Aleg
Posts: 1381
Joined: Thu Oct 10, 2013 8:26 pm

Re: MQN

Post by Aleg »

tony wrote:No sse2 version of 5.14 so not in a position to compare Aleg. My understanding is you have a preference for lots of detail and wonder is that how 5.14 sounds or is there a warm edge to it? Nigel do you think the same about 5.14?
Hi Tony

No, it is not about the details, it is about tonal balance, instrumental separation, vocal placement and natural highs and decays. The musicality of 5.14 is still much better than the KSs.


The KSs have a kind of ease, that makes it pleasant and has potential for trumping 5.14, but in terms of musicality I don't feel it is near.
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
nige2000
Posts: 4253
Joined: Thu Feb 14, 2013 10:47 am
Location: meath

Re: MQN

Post by nige2000 »

tony wrote:No sse2 version of 5.14 so not in a position to compare Aleg. My understanding is you have a preference for lots of detail and wonder is that how 5.14 sounds or is there a warm edge to it? Nigel do you think the same about 5.14?
My testing has been a little half arsed as I haven't done as much cross comparisons as I used to
But certainly 5.14 avx2 I'd have to go back through the thread and pick out a few I liked and retest
I think I remember thinking 5.14 was superceded but I'd need to recheck

Aleg
That's the properties I was calling micro detail
It's certainly the lacking problem in ks atm
sd card player, modded soekris dac, class a lifepo4 amp or gb class a/b amp, diy open baffle speakers based on project audio mundorf trio 10's
jesuscheung
Posts: 2491
Joined: Mon Oct 07, 2013 11:09 pm

Re: MQN

Post by jesuscheung »

Aleg wrote:
cvrle59 wrote:Finally got into this new stuff...v7.18 avx2/3.64 control/portaudio v32 avx, excellent, way to go.
V7.22 avx2 doesn't work on my system, but ssse2 is not my favorite compared to v7.18 avx2.
I can almost say that I just left my long term love, 5.14 avx2.
George
Don't do that yet, 5.14 still has a lot more magic and musicality than these KS's.
I've heared all the KS/PA's but the magic is still with 5.14.
you have "heard all the KS/PA's" in one software setting that you believe in.

try toggle things on and off in bios/windows. magic might go away
tony
Posts: 3144
Joined: Mon Jan 18, 2010 2:36 pm

Re: MQN

Post by tony »

Aleg wrote: Hi Tony

No, it is not about the details, it is about tonal balance, instrumental separation, vocal placement and natural highs and decays. The musicality of 5.14 is still much better than the KSs.


The KSs have a kind of ease, that makes it pleasant and has potential for trumping 5.14, but in terms of musicality I don't feel it is near.

Hi Aleg, My testing is a bit like Nigel's getting a bit more fragmented and less time going back comparing older versions. The new version especially 7.22 albeit with only an hour or two's listen to me seems to have a lot of the qualities you describe. Let's see how things develop I would need a sanity check at a listening session at some point.

Can you either post or pm some of the stuff you use for testing? Curious to try it.
GroupBuySD DAC/First Watt AlephJ/NigeAmp/Audio PC's/Lampi L4.5 Dac/ Groupbuy AD1862 DHT Dac /Quad ESL63's.Tannoy Legacy Cheviots.
Aleg
Posts: 1381
Joined: Thu Oct 10, 2013 8:26 pm

Re: MQN

Post by Aleg »

jesuscheung wrote:
you have "heard all the KS/PA's" in one software setting that you believe in.

try toggle things on and off in bios/windows. magic might go away
I'm not interested in making the magic go away Image
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
cvrle59
Posts: 449
Joined: Tue Oct 08, 2013 12:45 am
Location: Canada

Re: MQN

Post by cvrle59 »

Aleg wrote:
cvrle59 wrote:Finally got into this new stuff...v7.18 avx2/3.64 control/portaudio v32 avx, excellent, way to go.
V7.22 avx2 doesn't work on my system, but ssse2 is not my favorite compared to v7.18 avx2.
I can almost say that I just left my long term love, 5.14 avx2.
George
Don't do that yet, 5.14 still has a lot more magic and musicality than these KS's.
I've heared all the KS/PA's but the magic is still with 5.14.
Hard to beat it (but not impossible , as we already know), exceptional version!
i3 Haswell, PPAStudio USB3 card and USB Micro cable/Chord Hugo/Nad-275BEE/Harbeth-30.1
jrling
Posts: 398
Joined: Tue Oct 08, 2013 7:54 pm
Location: London

Re: MQN MMCSS

Post by jrling »

I am unclear about use of MMCSS with MQn-KS?

Should we be disconnecting the dependency with Windows Audio Service and Disabling MMCSS completely?
Or is Gordon doing that in his code?
Or is MQn itself applying settings in MMCSS in the code?

Any clarity welcomed.
Maplin XM21X 12V float charging A123 26650 LiFePO4 battery/Maxwell Supercap PSU for Mitac PD10-BI J1900 Bay Trail, WTFPlay, Hiface Evo, Bow Technologies 1704 NOS DAC, StereoKnight TVC, Quad II monoblocks, ZU Audio Druid Mk4/Method Sub
User avatar
satshanti
Posts: 85
Joined: Sat Mar 29, 2014 6:59 pm

Re: MQN

Post by satshanti »

Compared various sse2 versions with somewhat surprising results:

7.18 > 7.22 > 7.16 > 7.20 sse2

7.22 is detailed but lacks body and coherence
7.20 is too sharp and edgy in my system

And Portaudio:

v31 > v32 > v30 (v32 is detailed but too harsh, v31 is transparent and smooth)

This is all system dependent of course.

Some further remarks: no Portaudio beyond v29 works with 2496 7.10 sse2 on my system.

@Taggart: if you're still following all this, a new MQNload with the option to switch between Portaudio versions would be very useful. :-)
uwtfplay on AMD FX8120@1600 RAM@800 FSB@1200 | AQ Jitterbug | Atlas Element USB cable | HiFimeDIY Sabre DAC 2 | NVA Super Sound Pipe | SMSL sApII headphone amp | AKG K702 (or HiFimeDIY UD20 DDX amp | Anti-Cable | Celestion DL6-II)
Post Reply