MQN

Anything to do with computer audio, hardware, software etc.
cvrle59
Posts: 449
Joined: Tue Oct 08, 2013 12:45 am
Location: Canada

Re: MQN

Post by cvrle59 »

I probably missed it somewhere down the line, sorry...
Does this new mqnplay with portaudio work with mqnload or we have to use batch program?
i3 Haswell, PPAStudio USB3 card and USB Micro cable/Chord Hugo/Nad-275BEE/Harbeth-30.1
User avatar
Octagon
Posts: 172
Joined: Tue Aug 19, 2014 2:50 pm

Re: MQN

Post by Octagon »

cvrle59 wrote:Does this new mqnplay with portaudio work with mqnload or we have to use batch program?
Yes it does, if you put the "1644" or "2492" to the end. For example:
mqnplay1644.exe 24 bit 7.22 wdmks sse2 to
mqnplay.exe 24 bit 7.22 wdmks sse2 1644

Enjoy
Thomas
Coax tractrix horn system 2 corner subwoofer / 6 full digital amplifier D802 floating PSU 12V battery / digital XO/DRC / 2 PC floating PSU picoless battery/Mutec REF 10/2x Mutec MC3.1+ USB floating PSU 6V/FireFace UCX floating PSU 12V battery/Mutec MC-4
cvrle59
Posts: 449
Joined: Tue Oct 08, 2013 12:45 am
Location: Canada

Re: MQN

Post by cvrle59 »

Octagon wrote:
cvrle59 wrote:Does this new mqnplay with portaudio work with mqnload or we have to use batch program?
Yes it does, if you put the "1644" or "2492" to the end. For example:
mqnplay1644.exe 24 bit 7.22 wdmks sse2 to
mqnplay.exe 24 bit 7.22 wdmks sse2 1644

Enjoy
Thomas
Yes, I always change the name of mqnplay for mqnload, but I haven't got chance to try this new stuff yet. I wasn't sure how mqnload handles it.
Thanks
i3 Haswell, PPAStudio USB3 card and USB Micro cable/Chord Hugo/Nad-275BEE/Harbeth-30.1
nige2000
Posts: 4253
Joined: Thu Feb 14, 2013 10:47 am
Location: meath

Re: MQN

Post by nige2000 »

reverb, micro micro detail, needs improving

also something with dynamic ability seems weird all bass/weight seems to be at the same level where notes or a chain of notes should get louder or quieter i suppose dynamic response seems too slow

otherwise not bad 7.19 avx2 was ok all very similar
sd card player, modded soekris dac, class a lifepo4 amp or gb class a/b amp, diy open baffle speakers based on project audio mundorf trio 10's
tony
Posts: 3144
Joined: Mon Jan 18, 2010 2:36 pm

Re: MQN

Post by tony »

sbgk wrote:uploaded 7.18 sse2 and 7.20 sse2/avx2 which is optimised for instruction latency and throughput (haswell), might be ok on other cpus

uploaded 7.22 sse2/avx2 which uses instructions from the recent wasapi versions, quite like it. 7.20 sounds good, but gets tiring, there's something about that digital sound that becomes uncomfortable after a while.
Thanks Gordon trying out 7.18sse2 and seems very dynamic to me. The usual aggressive treble stuff I use for testing sounds excellent. Again bass for me seems fine. If this is just the beginning of the journey scary to think how good it might get.

Not hearing the deficiencies Nigel feels are there. Will skip 7.20 and try 7.22 next
GroupBuySD DAC/First Watt AlephJ/NigeAmp/Audio PC's/Lampi L4.5 Dac/ Groupbuy AD1862 DHT Dac /Quad ESL63's.Tannoy Legacy Cheviots.
nige2000
Posts: 4253
Joined: Thu Feb 14, 2013 10:47 am
Location: meath

Re: MQN

Post by nige2000 »

Lampizator sorta compensates for bass and weight
The wasapi ks differences are smallish but magical all the same
sd card player, modded soekris dac, class a lifepo4 amp or gb class a/b amp, diy open baffle speakers based on project audio mundorf trio 10's
tony
Posts: 3144
Joined: Mon Jan 18, 2010 2:36 pm

Re: MQN

Post by tony »

nige2000 wrote:Lampizator sorta compensates for bass and weight
The wasapi ks differences are smallish but magical all the same
Maybe, might try the cíunas to compare. But agree the differences between w and ks are very small certainly at this point.

7.22sse for me is stunning. Level of detail is incredible and not harsh in anway. Great work Gordon
GroupBuySD DAC/First Watt AlephJ/NigeAmp/Audio PC's/Lampi L4.5 Dac/ Groupbuy AD1862 DHT Dac /Quad ESL63's.Tannoy Legacy Cheviots.
cvrle59
Posts: 449
Joined: Tue Oct 08, 2013 12:45 am
Location: Canada

Re: MQN

Post by cvrle59 »

Finally got into this new stuff...v7.18 avx2/3.64 control/portaudio v32 avx, excellent, way to go.
V7.22 avx2 doesn't work on my system, but ssse2 is not my favorite compared to v7.18 avx2.
I can almost say that I just left my long term love, 5.14 avx2.
i3 Haswell, PPAStudio USB3 card and USB Micro cable/Chord Hugo/Nad-275BEE/Harbeth-30.1
jesuscheung
Posts: 2491
Joined: Mon Oct 07, 2013 11:09 pm

Re: MQN

Post by jesuscheung »

prefer 7.18 sse. easy-going on the ears.
(actually 7.16 sse is more easy-going but less bass)

in terms of details:
v32 > v31 > v30.

here v30's treble is fully "round". v32/v31 has mildly noticeable edges.
Aleg
Posts: 1381
Joined: Thu Oct 10, 2013 8:26 pm

Re: MQN

Post by Aleg »

cvrle59 wrote:Finally got into this new stuff...v7.18 avx2/3.64 control/portaudio v32 avx, excellent, way to go.
V7.22 avx2 doesn't work on my system, but ssse2 is not my favorite compared to v7.18 avx2.
I can almost say that I just left my long term love, 5.14 avx2.
George
Don't do that yet, 5.14 still has a lot more magic and musicality than these KS's.
I've heared all the KS/PA's but the magic is still with 5.14.
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
Post Reply