MQN
Re: MQN
I probably missed it somewhere down the line, sorry...
Does this new mqnplay with portaudio work with mqnload or we have to use batch program?
Does this new mqnplay with portaudio work with mqnload or we have to use batch program?
i3 Haswell, PPAStudio USB3 card and USB Micro cable/Chord Hugo/Nad-275BEE/Harbeth-30.1
Re: MQN
Yes it does, if you put the "1644" or "2492" to the end. For example:cvrle59 wrote:Does this new mqnplay with portaudio work with mqnload or we have to use batch program?
mqnplay1644.exe 24 bit 7.22 wdmks sse2 to
mqnplay.exe 24 bit 7.22 wdmks sse2 1644
Enjoy
Thomas
Coax tractrix horn system 2 corner subwoofer / 6 full digital amplifier D802 floating PSU 12V battery / digital XO/DRC / 2 PC floating PSU picoless battery/Mutec REF 10/2x Mutec MC3.1+ USB floating PSU 6V/FireFace UCX floating PSU 12V battery/Mutec MC-4
Re: MQN
Yes, I always change the name of mqnplay for mqnload, but I haven't got chance to try this new stuff yet. I wasn't sure how mqnload handles it.Octagon wrote:Yes it does, if you put the "1644" or "2492" to the end. For example:cvrle59 wrote:Does this new mqnplay with portaudio work with mqnload or we have to use batch program?
mqnplay1644.exe 24 bit 7.22 wdmks sse2 to
mqnplay.exe 24 bit 7.22 wdmks sse2 1644
Enjoy
Thomas
Thanks
i3 Haswell, PPAStudio USB3 card and USB Micro cable/Chord Hugo/Nad-275BEE/Harbeth-30.1
Re: MQN
reverb, micro micro detail, needs improving
also something with dynamic ability seems weird all bass/weight seems to be at the same level where notes or a chain of notes should get louder or quieter i suppose dynamic response seems too slow
otherwise not bad 7.19 avx2 was ok all very similar
also something with dynamic ability seems weird all bass/weight seems to be at the same level where notes or a chain of notes should get louder or quieter i suppose dynamic response seems too slow
otherwise not bad 7.19 avx2 was ok all very similar
sd card player, modded soekris dac, class a lifepo4 amp or gb class a/b amp, diy open baffle speakers based on project audio mundorf trio 10's
Re: MQN
Thanks Gordon trying out 7.18sse2 and seems very dynamic to me. The usual aggressive treble stuff I use for testing sounds excellent. Again bass for me seems fine. If this is just the beginning of the journey scary to think how good it might get.sbgk wrote:uploaded 7.18 sse2 and 7.20 sse2/avx2 which is optimised for instruction latency and throughput (haswell), might be ok on other cpus
uploaded 7.22 sse2/avx2 which uses instructions from the recent wasapi versions, quite like it. 7.20 sounds good, but gets tiring, there's something about that digital sound that becomes uncomfortable after a while.
Not hearing the deficiencies Nigel feels are there. Will skip 7.20 and try 7.22 next
GroupBuySD DAC/First Watt AlephJ/NigeAmp/Audio PC's/Lampi L4.5 Dac/ Groupbuy AD1862 DHT Dac /Quad ESL63's.Tannoy Legacy Cheviots.
Re: MQN
Lampizator sorta compensates for bass and weight
The wasapi ks differences are smallish but magical all the same
The wasapi ks differences are smallish but magical all the same
sd card player, modded soekris dac, class a lifepo4 amp or gb class a/b amp, diy open baffle speakers based on project audio mundorf trio 10's
Re: MQN
Maybe, might try the cíunas to compare. But agree the differences between w and ks are very small certainly at this point.nige2000 wrote:Lampizator sorta compensates for bass and weight
The wasapi ks differences are smallish but magical all the same
7.22sse for me is stunning. Level of detail is incredible and not harsh in anway. Great work Gordon
GroupBuySD DAC/First Watt AlephJ/NigeAmp/Audio PC's/Lampi L4.5 Dac/ Groupbuy AD1862 DHT Dac /Quad ESL63's.Tannoy Legacy Cheviots.
Re: MQN
Finally got into this new stuff...v7.18 avx2/3.64 control/portaudio v32 avx, excellent, way to go.
V7.22 avx2 doesn't work on my system, but ssse2 is not my favorite compared to v7.18 avx2.
I can almost say that I just left my long term love, 5.14 avx2.
V7.22 avx2 doesn't work on my system, but ssse2 is not my favorite compared to v7.18 avx2.
I can almost say that I just left my long term love, 5.14 avx2.
i3 Haswell, PPAStudio USB3 card and USB Micro cable/Chord Hugo/Nad-275BEE/Harbeth-30.1
-
- Posts: 2491
- Joined: Mon Oct 07, 2013 11:09 pm
Re: MQN
prefer 7.18 sse. easy-going on the ears.
(actually 7.16 sse is more easy-going but less bass)
in terms of details:
v32 > v31 > v30.
here v30's treble is fully "round". v32/v31 has mildly noticeable edges.
(actually 7.16 sse is more easy-going but less bass)
in terms of details:
v32 > v31 > v30.
here v30's treble is fully "round". v32/v31 has mildly noticeable edges.
Re: MQN
Georgecvrle59 wrote:Finally got into this new stuff...v7.18 avx2/3.64 control/portaudio v32 avx, excellent, way to go.
V7.22 avx2 doesn't work on my system, but ssse2 is not my favorite compared to v7.18 avx2.
I can almost say that I just left my long term love, 5.14 avx2.
Don't do that yet, 5.14 still has a lot more magic and musicality than these KS's.
I've heared all the KS/PA's but the magic is still with 5.14.
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.