MQN

Anything to do with computer audio, hardware, software etc.
Post Reply
User avatar
minionas
Posts: 101
Joined: Mon Jul 29, 2013 6:45 am
Location: Lithuania

Re: MQN

Post by minionas »

I get exactly same results as Aleg, on my rDac
Aleg wrote:mqncontrol R1.1 512 and mqnplay R1.4 gives immediate crackling sound.

Using mqncontrol R1.1 512 and mqnplay R1.3 plays just fine and sounds nice.

So some incompatibility in my setup with that last version.

Cheers

Aleg
Top
taggart
Posts: 117
Joined: Mon Oct 07, 2013 10:44 pm
Location: Cologne

Re: MQN

Post by taggart »

Aleg wrote:mqncontrol R1.1 512 and mqnplay R1.4 gives immediate crackling sound.
Using mqncontrol R1.1 512 and mqnplay R1.3 plays just fine and sounds nice.
+1
Top
DJ le Roi
Posts: 44
Joined: Wed Oct 09, 2013 7:34 pm

Re: MQN

Post by DJ le Roi »

taggart wrote:
Aleg wrote:mqncontrol R1.1 512 and mqnplay R1.4 gives immediate crackling sound.
Using mqncontrol R1.1 512 and mqnplay R1.3 plays just fine and sounds nice.
+1
+1
Top
John Dot
Posts: 166
Joined: Tue Oct 08, 2013 6:19 pm

Re: MQN

Post by John Dot »

R1.4 works perfect on my system (w8.1 x64)
PC: CPU Q8400, 8GB Ram, Windows 8.1 x64
DAC: HRT Music Streamer II+, Asus Xonar Essence ST (+ HiEnd DYI upgrades)
Top
Aleg
Posts: 1381
Joined: Thu Oct 10, 2013 8:26 pm

Re: MQN

Post by Aleg »

John Dot wrote:R1.4 works perfect on my system (w8.1 x64)
John

What is your DAC and what drivers are you using with it?

---
Aleg
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
Top
sbgk
Posts: 1950
Joined: Mon Oct 07, 2013 9:45 pm

Re: MQN

Post by sbgk »

I see R1.4 had a slightly different release point to normal and was equivalent to the 1.0 versions, R1.3 is the 3.0 version, shall do a 2.0 version.
Top
Clive
Posts: 205
Joined: Mon Oct 07, 2013 11:12 pm

Re: MQN

Post by Clive »

1.4 is fine with my Octave mkii with its m2tech usb. Better than fine..It's excellent
Top
John Dot
Posts: 166
Joined: Tue Oct 08, 2013 6:19 pm

Re: MQN

Post by John Dot »

Aleg wrote: What is your DAC and what drivers are you using with it?
Aleg
http://highresolutiontechnologies.com/m ... er-ii-plus with it's own built-in drivers and Asus Xonar Essence ST (custom Muses Opamp Edition). But can't play anything above 24/48.
Last edited by John Dot on Wed Mar 12, 2014 9:25 pm, edited 1 time in total.
PC: CPU Q8400, 8GB Ram, Windows 8.1 x64
DAC: HRT Music Streamer II+, Asus Xonar Essence ST (+ HiEnd DYI upgrades)
Top
cvrle59
Posts: 449
Joined: Tue Oct 08, 2013 12:45 am
Location: Canada

Re: MQN

Post by cvrle59 »

sbgk wrote:I see R1.4 had a slightly different release point to normal and was equivalent to the 1.0 versions, R1.3 is the 3.0 version, shall do a 2.0 version.
None of the R1.x versions could play 24/192 on my system, 24/96 or 24/88 no problem. Any idea?
i3 Haswell, PPAStudio USB3 card and USB Micro cable/Chord Hugo/Nad-275BEE/Harbeth-30.1
Top
Aleg
Posts: 1381
Joined: Thu Oct 10, 2013 8:26 pm

Re: MQN

Post by Aleg »

cvrle59 wrote:
sbgk wrote:I see R1.4 had a slightly different release point to normal and was equivalent to the 1.0 versions, R1.3 is the 3.0 version, shall do a 2.0 version.
None of the R1.x versions could play 24/192 on my system, 24/96 or 24/88 no problem. Any idea?
Cvrle59
Now you are using Windows' native USB audio driver you are limited to 96 kHz.
The 'only' reason that proprietary drivers exist for Windows is to get support above 96kHz because Microsoft refuses the upgrade their drivers to support higher than 96 kHz.

So either you install the Naim driver again to get 192kHz and above or you stick to Windows USB driver and be limited to 96kHz.

Cheers

Aleg
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
Top
Post Reply

Return to “Computer Audio”