BIG mono blocs wanted

For Sale/Wanted
Forum rules
Note that Tir Na HiFi does not take any responsibility for transactions arranged or carried out here. It is up to the seller and buyer to check each other out! Please be sensible folks, and if there is something you think is wrong, let a mod know, OK?

To make it as clear as we can, here are some simple guidelines:

a) like any forum, the success of tirnahifi is entirely dependent on discussion. All members are encouraged to participate in discussion of music, hifi, etc.
b) tirnahifi is not designed to be, nor intended to be, a marketplace. Any member who uses the site merely for selling will be looked on suspiciously.
c) those members who choose to sell on the site should be aware that the mods do keep an eye on the stuff for sale, plus the demeanour of the seller. Sometimes we may lock/delete/ban a sales thread on this basis.
d) honesty is paramount in all selling transactions. Commercial sellers who label themselves as such are accepted at the discretion of the moderating team.
e) All ads have to include information about age, price, provenance, etc.
f) THE MODERATING TEAM RESERVE THE RIGHT TO REMOVE ANY ADS AT THEIR DISCRETION.
g) Commercial sellers should approach any of the moderation team in advance of posting. First time commercial posts without moderator contact will be removed.
willsandbills
Posts: 192
Joined: Fri Jul 29, 2011 9:31 pm
Location: galway

BIG mono blocs wanted

Post by willsandbills »

Wondering if anyone has a pair of monos in excess of 250 watts each for sale
willsandbills
Posts: 192
Joined: Fri Jul 29, 2011 9:31 pm
Location: galway

Re: BIG mono blocs wanted

Post by willsandbills »

somebody must have something? a pair of Krells maybe ?
cbarone
Posts: 144
Joined: Fri Mar 19, 2010 1:18 pm

Re: BIG mono blocs wanted

Post by cbarone »

I'm sure I could find something suitable for 7k :-)
cbarone
Posts: 144
Joined: Fri Mar 19, 2010 1:18 pm

Re: BIG mono blocs wanted

Post by cbarone »

There is a pair of Classe CA-M350 on Cloney audio website.
willsandbills
Posts: 192
Joined: Fri Jul 29, 2011 9:31 pm
Location: galway

Re: BIG mono blocs wanted

Post by willsandbills »

saw them thanks would go for them at 2 k but not at nearly 3k.
thanks for spotting them tho.
halvis
Posts: 142
Joined: Fri Apr 09, 2010 3:53 pm

Re: BIG mono blocs wanted

Post by halvis »

I have some Michell Alecto Monoblocks. These are currently only 100 watts a side. However, they can be upgraded to 250w for around £900 I believe. Let me know if interested. I would want €650 for them as they are. I have the boxes so they can be shipped to you and onto the UK for upgrading.
HiFiFan
Posts: 373
Joined: Wed Nov 24, 2010 1:13 am

Re: BIG mono blocs wanted

Post by HiFiFan »

Do you mean physically big or just > 250 watts. If you are looking at under $2K (in fact considerably less) I would recommend you look at building/buying a pair of Hypex NC400 based amps. I just built one out of curiousity with good results.

Output power 400W/4ohms
Characterised from open circuit down to 2 ohm. Lower load impedances are allowed, 24A current limit
Signal-to-noise ratio: unweighted, min 124dB re full power, 101dB re 2.8Vrms
Output impedance: typ. 0.7 milliohms (corresponds to a DF of 11000) PSRR: better than 85dB

1010 Euro for the electronics and then whatever for the binding posts, RCA/XLR inputs and cases.

I believe it will eaisly drive whatever speakers you are planning to use and all around seemed a fairly impressive solution for the sub $5K price bracket
SonicTransporter Optical i9, Roon, opticalRendu, Sonore Signare LPSU, Chord DAVE, Merrill Audio Element 116 Monoblocs, Wilson Audio Sasha 2
halvis
Posts: 142
Joined: Fri Apr 09, 2010 3:53 pm

Re: BIG mono blocs wanted

Post by halvis »

HiFiFan wrote:Do you mean physically big or just > 250 watts. If you are looking at under $2K (in fact considerably less) I would recommend you look at building/buying a pair of Hypex NC400 based amps. I just built one out of curiousity with good results.
I am very curious about these also, I was just concerned about the current limit at 24A. That's doesn't seem an awful lot, can I ask what speakers you are using with these?

Sorry to take this off topic Will, perhaps you can PM a reply HifiFan.
User avatar
Diapason
Posts: 4125
Joined: Mon Jan 18, 2010 11:51 am

Re: BIG mono blocs wanted

Post by Diapason »

24 A sounds like loads to me, unless you'll be using them for welding! That would be over 4000W into an 8 ohm load, and still over 1000W into 2 ohm. Good God, man, what are these speakers?!
Nerdcave: ...is no more! :(
Sitting Room: Wadia 581SE - Rega Planar 3/AT VM95ML & SH - Bluesound Node II - Copland CSA 100 - Audioplan Kontrast 3
Kitchen: WiiM Pro - Wadia 151 - B&W 685s2
willsandbills
Posts: 192
Joined: Fri Jul 29, 2011 9:31 pm
Location: galway

Re: BIG mono blocs wanted

Post by willsandbills »

Very interesting, i read a bit about these lately and looked at their site. Would love to hear them if anyone has them up and running,
One question are they Class D??

willie

and thanks for input
Post Reply