Acoustic Signature thread drive TT motor.
Serious heavy kit.
Dual speed switching.
Heavy 'wall wart' type 2 pin power supply.
A quality piece of kit.
€165.00
[That's not my TT. Just to show hoe the motor works.]
SOLD TT Motor - Upgrade or DIY - a bargain !!!!
Forum rules
Note that Tir Na HiFi does not take any responsibility for transactions arranged or carried out here. It is up to the seller and buyer to check each other out! Please be sensible folks, and if there is something you think is wrong, let a mod know, OK?
To make it as clear as we can, here are some simple guidelines:
a) like any forum, the success of tirnahifi is entirely dependent on discussion. All members are encouraged to participate in discussion of music, hifi, etc.
b) tirnahifi is not designed to be, nor intended to be, a marketplace. Any member who uses the site merely for selling will be looked on suspiciously.
c) those members who choose to sell on the site should be aware that the mods do keep an eye on the stuff for sale, plus the demeanour of the seller. Sometimes we may lock/delete/ban a sales thread on this basis.
d) honesty is paramount in all selling transactions. Commercial sellers who label themselves as such are accepted at the discretion of the moderating team.
e) All ads have to include information about age, price, provenance, etc.
f) THE MODERATING TEAM RESERVE THE RIGHT TO REMOVE ANY ADS AT THEIR DISCRETION.
g) Commercial sellers should approach any of the moderation team in advance of posting. First time commercial posts without moderator contact will be removed.
Note that Tir Na HiFi does not take any responsibility for transactions arranged or carried out here. It is up to the seller and buyer to check each other out! Please be sensible folks, and if there is something you think is wrong, let a mod know, OK?
To make it as clear as we can, here are some simple guidelines:
a) like any forum, the success of tirnahifi is entirely dependent on discussion. All members are encouraged to participate in discussion of music, hifi, etc.
b) tirnahifi is not designed to be, nor intended to be, a marketplace. Any member who uses the site merely for selling will be looked on suspiciously.
c) those members who choose to sell on the site should be aware that the mods do keep an eye on the stuff for sale, plus the demeanour of the seller. Sometimes we may lock/delete/ban a sales thread on this basis.
d) honesty is paramount in all selling transactions. Commercial sellers who label themselves as such are accepted at the discretion of the moderating team.
e) All ads have to include information about age, price, provenance, etc.
f) THE MODERATING TEAM RESERVE THE RIGHT TO REMOVE ANY ADS AT THEIR DISCRETION.
g) Commercial sellers should approach any of the moderation team in advance of posting. First time commercial posts without moderator contact will be removed.
SOLD TT Motor - Upgrade or DIY - a bargain !!!!
- Attachments
-
- as tool.jpg (255.52 KiB) Viewed 1397 times
-
- IMG_0724.jpg (50.36 KiB) Viewed 1397 times
-
- IMG_0725.jpg (49.23 KiB) Viewed 1397 times
Last edited by Gerry D on Sat Feb 23, 2013 4:09 pm, edited 1 time in total.
"Quality means doing it right when no one is looking" - Henry Ford
Re: TT Motor - Upgrade or DIY - a bargain !!!!
Just to take the bare look out of it :) That's a fantastic price Gerry....Not too gone on the finish but what the heck, especially at ridiculously low price!
Re: TT Motor - Upgrade or DIY - a bargain !!!!
Thanks Dermot.
Yes, a good price. But I'm trying to be realistic in these recessionary times.
It's a lovely motor. Quiet, stable speed.
I used it for a couple of years for some of my DIY turntables.
I think that it, along with the great Rega tonearm I have for sale here also, make the start of a fantastic TT set up.
If somebody was to pick up an old chassis and platter they would have all the bits of a mighty turntable for little money. Just a few hours of easy effort.
Yes, a good price. But I'm trying to be realistic in these recessionary times.
It's a lovely motor. Quiet, stable speed.
I used it for a couple of years for some of my DIY turntables.
I think that it, along with the great Rega tonearm I have for sale here also, make the start of a fantastic TT set up.
If somebody was to pick up an old chassis and platter they would have all the bits of a mighty turntable for little money. Just a few hours of easy effort.
"Quality means doing it right when no one is looking" - Henry Ford
Re: TT Motor - Upgrade or DIY - a bargain !!!!
There's a guy on DIYaudio at the moment also selling a clone of the Teres bearing at $180 each. This is excellent value, would mate perfectly with the motor here, and would really put you on a par with th ebest TTs out there. You would still need a platter - and the bearing is made for a fairly high mass one. It would take up to 20-25kg if you wanted to go that far!
So, motor and arm here, bearing over there, you would only need a platter and chassis to make something pretty special.
Fran
So, motor and arm here, bearing over there, you would only need a platter and chassis to make something pretty special.
Fran
Do or do not, there is no try
Re: TT Motor - Upgrade or DIY - a bargain !!!!
Richard's Mission TT would be a solid start! viewtopic.php?f=11&t=1373Fran wrote:There's a guy on DIYaudio at the moment also selling a clone of the Teres bearing at $180 each. This is excellent value, would mate perfectly with the motor here, and would really put you on a par with th ebest TTs out there. You would still need a platter - and the bearing is made for a fairly high mass one. It would take up to 20-25kg if you wanted to go that far!
So, motor and arm here, bearing over there, you would only need a platter and chassis to make something pretty special.
Fran
Vinyl -anything else is data storage.
Thorens TD124 Mk1 + Kuzma Stogi 12"arm, HANA Red, Gold Note PH 10 + PSU. ADI-2 Dac, Lector CDP7, Wyred4Sound pre, Airtight ATM1s, Klipsch Heresy IV, Misc Mains, RCA + XLR ICs, Tellurium Q spkr cable
Thorens TD124 Mk1 + Kuzma Stogi 12"arm, HANA Red, Gold Note PH 10 + PSU. ADI-2 Dac, Lector CDP7, Wyred4Sound pre, Airtight ATM1s, Klipsch Heresy IV, Misc Mains, RCA + XLR ICs, Tellurium Q spkr cable
Re: TT Motor - Upgrade or DIY - a bargain !!!!
Indeed, thanks - except it's sold pending payment (if the postage to UK is too extortionate then I guess purchaser may back out...will know later this week!).
Richard
Richard
Re: TT Motor - Upgrade or DIY - a bargain !!!!
If anyone is interested in going this route, I have all the Teres drawings etc to get you underway. You can even come here and measure mine and I can bring you through the various philosphies etc etc etc. Be great to have another Teres clone in the country.
Fran
Fran
Do or do not, there is no try
Re: TT Motor - Upgrade or DIY - a bargain !!!!
Nice one.Fran wrote:If anyone is interested in going this route, I have all the Teres drawings etc to get you underway. You can even come here and measure mine and I can bring you through the various philosphies etc etc etc. Be great to have another Teres clone in the country.
Fran
I think it's a really satisfying venture to make something that you can enjoy listening to.
The turntable is a great way to start on the DIY route.
Particularly if electronics are daunting.
"Quality means doing it right when no one is looking" - Henry Ford
Re: TT Motor - Upgrade or DIY - a bargain !!!!
big BUMP
"Quality means doing it right when no one is looking" - Henry Ford
Re: TT Motor - Upgrade or DIY - a bargain !!!!
You have pm....G